Abstract:Laminated/bimetal composites can offer the advantage of combining constituent metals, but their heterogeneous microstructures exhibit different mechanical properties during subsequent remanufacturing process than those of the homogeneous counterparts. This study investigated the tensile properties, microstructural evolution and deformation behaviours of a new explosive welded TA1/5083 composite sheet using the in-situ characterisation. It is found that a wavy transition zone forms in the composite sheet, showing gradients in the element diffusion and micro-hardness adjacent to the interface. The slip bands with the tensile direction of 45° primarily occur in the 5083 side (rather than the TA1 side) with an increase in deformation. Although the dislocation density of the grains in the 5083 layer increases significantly, these grains are slightly elongated along the tensile direction without a significant orientation change. Three deformation stages and a subsequent crack initiation stage appear during the in-situ tensile process. The initiation of micro-cracks in the interfacial zone results from the internal stress concentration occurring at the bottom of interfacial wave structure. Once initial micro-cracks evolve into the intermetallic compounds (IMCs) of the interfacial zone, the high magnitude of stress concentrations of the TA1 and 5083 layers leads to necking and sequential fractures. This study can provide a reference for the design of high-quality Ti/Al composite components for industry.

Microstructure and properties of the Ti/Al2O3/NiCr composites fabricated by explosive compaction/cladding

Micro-/nano-scale interface structure and mechanical characteristics of the Al/Ti composite bar produced by a novel continuously-extruded technique

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding

Interface characteristics and mechanical properties of titanium/aluminum composites with an interlayer fabricated by explosive welding

Microstructure and tribological properties of laser in-situ synthesized Ti3Al composite coating on Ti-6Al-4V

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Interpenetrating microstructure and fracture mechanism of NiAl/TiC composites by pressureless melt infiltration

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

Microstructure and characterization of Ti–Al explosive welding composite plate

Tribological properties and microstructures of Al2O3-TiC-TiB2 reinforced composites

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Micro-/nano-scale structure and elemental diffusion in the Al/Ti/Al sandwich structure

Microstructures and properties of in situ synthesis Ni/Ni-Al multilayer composites

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

Revealing the formation, strengthening and toughening mechanism of a new (Ti3AlC2+Al2O3)p /Al3Ti composite with strength-ductility synergy

In-Situ Observation of Fracture Behavior of Ti-Aluminide Multi-Layered Composites Produced by a Hybrid Sintering Process

Microstructure and High-Temperature Mechanical Properties of CrMnFeCoNi/TiAl Composites Prepared by Powder Metallurgy

Study on Microstructure and Mechanical Properties Modification of Cu-Ti3AlC2 Composites by Ni Element