Abstract:In recent years, HVDC cables have been greatly improved, 500kV XLPE DC cable has been developed, and many XLPE DC cables of lower applied voltage have been used in HVDC systems. However, there still is not a unified standard for testing high voltage DC extruded cable systems, only a recommendation. Furthermore the recommendation only gives a lower limit of ageing parameter (n=10 in the inverse power law tL·Vn= constant), which directly determines the voltage used in the test. A more precise value of ageing parameter is needed in order to improve the testing method. The most common method of estimating the ageing parameter uses constant-stress tests at different voltages (fields) and is based on the inverse power model, but this method takes a lot of time and cannot give usable data when the applied voltage is low. An alternative method is to use step-stress tests based on the cumulative life model. This approach can give usable data quickly, but parameter evaluation is much harder than for the constant-stress tests and the approximations necessary for the data solution unavoidably brings errors. In this paper, a new method of estimating the ageing parameter of XLPE is proposed. Step-stress tests are also used but a new parameter evaluation method is presented, which avoids complicated approximations in the data solution. This new method can greatly reduce the errors and easily give the ageing parameter. A series of step-stress tests on 0.3 mm thick XLPE samples have been carried out to illustrate the method. The values of the ageing parameter, n, obtained from different methods are compared, and it is found that the new method gives a greater consistency between different test protocols, indicating a more accurate estimation of its value. However, a comparison between the new method and the constant stress accelerated life tests is still needed to confirm the accuracy of the new method.

Estimating the Inverse Power Law Aging Exponent for the DC Aging of XLPE and Its Nanocomposites at Different Temperatures

Estimating Aging Parameter of Xlpe and Its Nanocomposites under Ac Voltage Using Step-Stress Test

Estimating the aging parameter of XLPE and its nanocomposites under temperature gradient

DC Insulation Properties of Commercial Grade 320 Kv HVDC XLPE/MgO Nanocomposite Material

Investigation on Thermal Aging and Degradation of XLPE for High Voltage Cable Applications

DC Breakdown Voltage Tests May Not Be A Good Indicator of Long-Term Ageing Behaviour A Study of Silica - XLPE Nanocomposites

Electrical Insulation Performance of Cross‐linked Polyethylene/mgo Nanocomposite Material for ±320 Kv High‐voltage Direct‐current Cables

Numerical Analysis of Thermo-Electric Field for AC XLPE Cables with Different Service Times in DC Operation Based on Conduction Current Measurement

Influence of Thermal Aging on Insulation Properties of Voltage Stabilizer Blended Cross-Linked Polyethylene

Effect of Tensile Stress on Insulation Properties of 500 Kv EHVAC XLPE Cable under Multi-Field Ageing

AC and DC Pre-Stressed Electrical Trees in LDPE and Its Aluminum Oxide Nanocomposites

A New Method of Estimating the Inverse Power Law Ageing Parameter of XLPE Based on Step-Stress Tests

Effect of thermal ageing on charge dynamics and material properties of 320 kV HVDC XLPE

Effect of Thermal Ageing on Space Charge Behavior of HVDC XLPE Materials

Non-debye dielectric behavior of aged XLPE cable insulation

Different Oxygen Diffusion Patterns in XLPE under Thermal Oxidative Aging

Structural Changes and Very-Low-Frequency Nonlinear Dielectric Response of XLPE Cable Insulation under Thermal Aging

Study on Aging Characteristics of XLPE Cable Insulation Based on Quantum Chemical Calculation

Correlation between Terahertz Dielectric Properties of XLPE and Its Composition Structure during Electrothermal Aging

Are Nano-Composites Really Better DC Insulators? A Study Using Silica Nanoparticles in XLPE

Study of Dielectric Response Characteristics for Thermal Aging of XLPE Cable Insulation