Abstract:The use of secondary batteries has been on the rise in recent years, especially solid-state batteries. However, security issues have become a major challenge in practical applications. Both lithium-ion batteries and lithium–sulfur batteries have safety problems that need to be solved. Herein, a polymer electrolyte suitable for the two types of batteries was easily synthesized. A polyvinylidene fluoride (PVDF)-based polymer electrolyte with 1-butyl-1-methyl pyrrolidine bis-trifluoromethyl sulfonimide (Py14TFSI) was used as the solid electrolyte. The ionic conductivity of the LiTFSI/Py14TFSI/cellulose acetate (CA)/PVDF polymer electrolyte was 1.45 × 10–4 S cm–1. The electrochemical stability window was 4.95 V. The transference number of the lithium ion was 0.231. The constant-current polarization test results showed that the polarization voltage was only 0.04 V when the current density was 1 mA cm–2. The first discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | LiFePO4 battery was 125.7 mA h g–1 (0.5 C), and the capacity retention rate was 95.22% after 50 cycles at room temperature. A multistage porous conductive carbon (M-PCC) material with micropores and mesopores was applied as the host of the sulfur cathode of lithium–sulfur batteries. The M-PCC material provided a carrier for sulfur and sulfide with a specific surface area of 1132.68 m2 g–1. The solid-state lithium–sulfur battery (Li | LiTFSI/Py14TFSI/CA/PVDF | ) had excellent electrochemical performance. The first discharge specific capacity was 1245.9 mA h g–1 with an average Coulombic efficiency of 97.34%. The energy of Py14TFSI cation and Li2S8 calculated by DFT was 8.8345 eV, which indicated that the polysulfide cannot adsorb onto the polymer electrolyte. XPS was used to measure the elemental composition of the anode–electrolyte interface after charge–discharge cycling. The uniform growth of lithium dendrite was observed by the SEM image of the anode after cycles. The results showed that a solid-state lithium–sulfur battery produced uniform solid electrolyte interface films and completely suppressed the shuttle effect.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00658?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00658</a>.Experimental section; characterization; AFM of polymer electrolyte: PVDF/Py14TFSI = 10:0 and PVDF/Py14TFSI = 10:7.5; XRD patterns of M-PCC; SEM images of M-PCC and ; TEM images of M-PCC (40,000×) and M-PCC(200,000×); CV curves of the Li | liquid electrolyte/PP separator | battery; active products at different charge and discharge stages; impedance spectrum at different cycles of the Li | liquid electrolyte/PP separator | battery; TG curve of ; and comparison the discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | battery with the previously reported solid polymer electrolyte lithium–sulfur batteries at different temperatures and rate capabilities (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00658/suppl_file/ae1c00658_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Study of Room Temperature Solid Polymer Electrolyte for Lithium Sulfur Battery

Study of Room Temperature Solid Polymer Electrolyte for Lithium Sulfur Battery

(Invited) Sulfide-Based Solid Electrolytes for Solid State Batteries

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Unique starch polymer electrolyte for high capacity all-solid-state lithium sulfur battery

High‐Performance Pure Polymer Electrolytes with Enhanced Ionic Conductivity for Room‐Temperature Applications

Garnet-Type Composite Polymer Electrolyte for Room-Temperature All-Solid-State Li–S Battery

Key issues and modification strategies towards high-performance polymer all-solid-state lithium-sulfur batteries

Plastic Crystal Polymer Electrolytes with Anion-Trapping Boron Moieties for Room Temperature All-Solid-State Sodium Batteries

Interfacial Chemistry and Ion-Transfer Mechanism for a Tailored Poly(thioether)-Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-state Lithium-Sulfur Batteries

Unleashing the Potential of Li-Metal Batteries A Breakthrough Ultra-High Room-Temperature Ionic Conductivity Composite Solid-State Electrolyte

Electrochemical investigation of Li-ion diffusion and absorbing polysulfide of hierarchically structured carbon for the quasi-solid lithium-sulfur batteries

Facile and Powerful In Situ Polymerization Strategy for Sulfur-Based All-Solid Polymer Electrolytes in Lithium Batteries

A Polymer-in-Salt Electrolyte Enables Room Temperature Lithium Metal Batteries

A Novel Solid Electrolyte Material (li17ge2p3s20) with High Ionic Conductivity

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries

Succinonitrile Plastic Crystal Polymer Electrolyte for Lithium Metal Battery

Interfacial Chemistry and Ion Transfer Mechanism for Tailored Poly(thioether) Enabled Hybrid Solid Polymer Electrolyte with Electrochemical Properties in All-Solid-State Lithium-Sulfur Batteries

Solid-State Polymer Electrolyte Solves the Transfer of Lithium Ions between the Solid–Solid Interface of the Electrode and the Electrolyte in Lithium–Sulfur and Lithium-Ion Batteries

Designing Polymer‐in‐Salt Electrolyte and Fully Infiltrated 3D Electrode for Integrated Solid‐State Lithium Batteries

Novel Lithium-Sulfur Polymer Battery Operating at Moderate Temperature