Abstract:Carbon nanotube film (CNTF) interlayer toughened carbon fiber (CF) reinforced epoxy resin (EP) hybrid composites were fabricated via resin transfer molding (RTM) processing in this paper. Multi-walled carbon nanotubes were prepared by chemical vapour deposition, and carbon nanobute films were prepared through vacuum filtration. Model I interlaminar fracture toughness G(IC) of laminates and model II interlaminar fracture toughness G(IIC) of laminates are used to characterize the fracture toughness. of the RTM laminates. Furthermore, the toughening mechanism is discussed through microstructure of the fracture surface combining mechanical properties. The compact degree of the carbon nanotube films was influenced by the ratio of the multi-walled carbon nanotubes, which led to different impregnation of the carbon nanobute films to the epoxy resin. Experimental results indicated that the carbon nanotube films from carbon nanotubes of large aspect ratios exhibited better impregnation effect than those films from carbon nanotubes of small aspect ratios. The carbon nanotube films intercalated in the interlayer of the composites between the carbon fiber and the matrix resin as a whole laminated structure, and they still kept a continuous grid structure in the CNTF/CF/EP hybrid composites. As to the model I interlaminar fracture toughness G(IC) of laminates,the carbon nanotube films have no obvious improvement on the G(IC) value. However, the carbon nanotube films laid between the carbon fiber layers changed the failure mode of the CF/EP composites, leading to increased initial failure load and breaking load. As to model II interlaminar fracture toughness G(IIC) of laminates, experimental results exhibited that the reinforcing efficacy on the sliding mode shear failure was remarkably increased for the CNTF/CF/EP hybrid composites. Model II interlaminar fracture toughness G(IIC) of laminates has increased from 1292 J/m(2) of the CF/EP to 2869 J/m(2) of the CNTF/CF/EP hybrid composites. There is 120% amplification in G(IIC) testing value. Microstructures of the CF/EP composites and the CNTF/CF/EP hybrid composites were characterized through scanning electron microscope (SEM) for understanding the prominent improvement on the toughening properties. SEM pictures showed that there was strong shear history of the carbon nanotube films via the sliding mode failure. The carbon nanotubes absorbed a great deal of energy through shear sliding and hindered crack growth,leading to increase of the G(IIC) value outstandingly.

Improvement of Interlaminar Fracture Toughness in Carbon Fiber/epoxy Composites with Carbon Nanotubes/polysulfone Interleaves

Cellulose Nanocrystal-Polyetherimide Hybrid Nanofibrous Interleaves for Enhanced Interlaminar Fracture Toughness of Carbon Fibre/epoxy Composites

Interlaminar toughening in carbon fiber/epoxy composites interleaved with CNT-decorated polycaprolactone nanofibers

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Enhanced Electrical Conductivity and Interlaminar Fracture Toughness of CF/EP Composites via Interleaving Conductive Thermoplastic Films

Synergistic Improvement of Electrical Conductivity and Interlaminar Toughness of Carbon Fiber Resin Matrix Composites Based on Intercalation Method

Increasing the interlaminar fracture toughness and thermal conductivity of carbon fiber/epoxy composites interleaved with carbon nanotube/polyimide composite films

Establishment of Interlaminar Structure and Crack Propagation in Carbon Fiber Reinforced Epoxy Composites by Interleaving CNTs/PEK-C Film

Study of Synergistic and Competitive Mechanisms on Toughening Cfrp Composites with Intrinsic and Extrinsic Multiscale Interleaves

Simultaneous Enhancement of Electrical Conductivity and Interlaminar Shear Strength of CF/EP Composites Through MWCNTs Doped Thermoplastic Polyurethane Film Interleaves

Effect of electrospun polysulfone/cellulose nanocrystals interleaves on the interlaminar fracture toughness of carbon fiber/epoxy composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Enhancing The Interlaminar Fracture Resistance Of Laminated Composites By Using Continuous Carbon Nanotube Films

Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture

Synergistic toughening on CFRP via in-depth stitched CNTs

CARBON NANOTUBE FILM INTERLAYER TOUGHENED CARBON FIBER REINFORCED EPOXY RESIN HYBRID COMPOSITES

Enhancing interlaminar fracture toughness of CFRP laminates with hybrid carbon nanotube/graphene oxide fillers

Improving the Interlaminar Fracture Toughness of Carbon/epoxy Laminates by Directly Incorporating with Porous Carbon Nanotube Buckypaper

Synergetic Improvement of Interlaminar Fracture Toughness in Carbon Fiber/Epoxy Composites Interleaved with PES/PEK-C Hybrid Nanofiber Veils

Improved interlaminar fracture toughness of carbon fiber/epoxy composites with a multiscale cellulose fiber interlayer

Enhancing interlaminar fracture toughness of carbon fiber/epoxy composites toughened by polyethersulfone resin and hybrid carbon nanotubes/graphene oxide