Abstract:This article presents the results of research on the thermal state of vacuum switch contacts during the conduction of short-circuit currents. This state is directly related to the value of the flowing current and the operating conditions of the switch. These conditions are mildest in the case of the conduction of operating currents through closed contacts. The situation worsens significantly when short-circuit currents are conducted, and the greatest destructive effects occur during commutation processes. Exceeding a certain level of contact destruction usually leads to the loss of the switching capacity of the switch. In vacuum switches, tracking the thermal state of the contacts is particularly difficult due to the inaccessibility of transducers or measurement sensors inside the chamber. In such a case, simulation studies verified by experimental results are important. This paper presents the results of such studies, directed at their practical implementation in the design and operation of vacuum switches. Simulation studies were conducted to analyze the thermal processes occurring in the contacts of vacuum switches during the conduction of short-circuit currents. Special attention was paid to the influence of contact parameters on the thermal processes occurring during the conduction of short-circuit currents. In addition to simulations, experimental studies were carried out to verify the simulation results. Ultimately, the research results presented are intended to provide practical knowledge of the design and operation of vacuum switches, particularly with regard to the contact heating processes during the conduction of short-circuit currents.

Study on Contact Resistance of 10kv Switch Cabinet

Three dimensional thermal field numerical calculation of 27.5 kV gas-insulated switchgear bus bar's cabinet

Research on Dynamic and Thermal Effects Based on the Calculation of the Short-Circuit Current in Low-Voltage DC Distribution Systems for Civil Buildings

Coupled Thermal-Electrical Analysis of 110 Kv Corrugated Aluminum Sheathed and Smooth Aluminum Sheath Cables Based on Finite Element Simulation Method

Thermal Simulation of AC Contactor

Temperature Rise Test and Analysis of High Current Switchgear in Distribution System

The Analysis of the Thermal Processes Occurring in the Contacts of Vacuum Switches During the Conduction of Short-Circuit Currents

Numerical Simulation of Contact Point Temperature Distribution and Fire Mechanism Analysis

Current Distribution and Thermal Effects Analysis on the Sliding Contact Arrangement in Circuit Breaker

Inversion Method for Contact Temperature of GIS Disconnect Switch

Temperature Rise Simulation Of Medium Voltage Cubicle Type Gas Insulated Switch-Gear Based On Coupling Of Multi-Physical Fields

Study on Switching Over-voltage and Its Restrictions in UHVAC System

Precise Multi‐dimensional Temperature‐rise Characterisation of Switchgear Based on Multi‐conditional Experiments and LPTN Model for High‐capacity Application

Analysis of Condensation Problem in High Voltage Switchgear and Design of Anti-condensation System

A Real-Time IR-Fusion Switchgear Contact Monitoring System (SCMS).

Simulation Analysis of Temperature Field and Electric Field for 10 kV AC XLPE Cable in DC Operation

Numerical simulation of the condensation process in high voltage switchgear based on the temperature and humidity distribution

Simulation analysis of electromagnetic-temperature field coupling of medium voltage switchgear based on finite element method

Analysis of Radiated Interference of 10kv Intelligen T Distribution Switch

An Approach to Monitor Medium Voltage Switchgear Plum Contact Connections Based on Temperature Rise Index

Study on Temperature Rise Characteristics of GIS Disconnector Under Different Operating Conditions