Abstract:Thermal stress and contact are two pivotal factors influencing the operational lifespan and performance of solid oxide fuel cell (SOFC) stacks. In practical kW-MW SOFC systems, stack boxes are typically constructed using kWclass stack blocks comprising dozens of cells. Temperature distribution affects the thermal stress distribution, thus affecting the contact of the stack. In this work, the thermal stress distribution and contact of a 2.5 kW external-manifold stack composed of 60 repeat units are investigated by using finite element analysis (FEA). To get a more accurate and realistic results, temperature data of a stack measured in an ongoing SOFC system is incorporated into the computational model. The influences of the clamp loads from manifolds, the structure of current collectors, the number of spacer plates, and the thickness of interconnects on the thermal stress distribution and contact of the stack are investigated. In the basic stack, the tensile stress induced by the temperature gradient appears to be the primary cause of the high thermal stress in the air inlet region of top cells. Due to the high-temperature strength of the seal material and endplates, the contact is inferior in cells near endplates. Increasing the clamp loads of manifolds within specified limits leads to a reduction in both the magnitude and area of high thermal stress, concurrently enhancing the stack contact. Strengthening the current collector structure induces more high-stress regions and simultaneously increases the stack contact. The introduction of overmuch spacer plates results in more high stress regions and a deterioration in stack contact. Moreover, increasing the thickness of interconnects introduces more high stress regions, negatively impacting stack contact.

Performance Degradation and Analysis of 10-Cell Anode-Supported SOFC Stack with External Manifold Structure

Improvement on Durability and Thermal Cycle Performance for Solid Oxide Fuel Cell Stack with External Manifold Structure

Long-Term Test of a Solid Oxide Fuel Cell Stack with External Manifold Structure

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Study on Component Interface Evolution of a Solid Oxide Fuel Cell Stack after Long Term Operation

Degradation Analysis and Durability Improvement for Sofc 1-Cell Stack

Feasibility study of an external manifold for planar intermediate- temperature solid oxide fuel cells stack

High and durable performance of an external-manifold designed reversible solid oxide cell stack

Performance and degradation of an SOEC stack with different cell components

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Degradation analysis of commercial interconnect materials for solid oxide fuel cells in stacks operated up to 18000 hours

Numerical Simulation and Analysis of Thermal Stress Distributions for a Planar Solid Oxide Fuel Cell Stack with External Manifold Structure

Material Research for Planar SOFC Stack

Effect of thermal cycling on durability of a solid oxide fuel cell stack with external manifold structure

Analysis of Gas Leakage and Current Loss of Solid Oxide Fuel Cells by Screen Printing

Transient Thermomechanical Analysis of a Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Thermal Stress and Contact Analysis Utilizing Tested Temperature Data in a Kw-Class External-Manifold Solid Oxide Fuel Cell Stack

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

Numerical Simulation of Electrical Performance and Distribution of SOFC Stacks with Different Manifold Arrangement