Abstract:A novel multi-wavelength mode-locked Erbium-doped fiber laser with tungsten disulfide (WS2) combined with a microfiber knot is described. This hybrid fiber structure facilitates strong light matter interaction between the saturated absorption of the WS2 material and high optical non-linearity of the microfiber knot. It is demonstrated experimentally that the novel fiber laser works stably in the absence of an external comb filter, with the generation of stable multi-wavelength picosecond pulses. In the multi-wavelength lasing regime, up to seven-wavelength stable mode-locked pulses are obtained using a polarization controller with the pump power at 250 mW. The pulse period and the pulsewidth are 188.7 ns and 16.3 ps, respectively. In addition, the number of multi-wavelength lasing channels can be changed by simply adjusting the microfiber knot size. Experimental results show the laser to have a stable output over 12-h recording period. The results of this investigation demonstrate that the optical microfiber knot with a WS2 overlay based fiber laser device can operate as a highly nonlinear optical component and a saturable absorber. The proposed multi-wavelength lasing device can therefore be widely used for non-linear and ultrafast photonics and has a number of advantages compared to similar devices using more conventional technologies, including low cost and good stability.

Demonstration of a Stable and Uniform Single-Wavelength Erbium-Doped Fiber Laser Based on Microfiber Knot Resonator

Demonstration of Microfiber Knot Laser

Microfiber Knot Dye Laser Based on the Evanescent-Wave-Coupled Gain

Stable and uniform multiwavelength erbium-doped fiber laser based on a microfiber knot resonator with a Sagnac loop reflector

Demonstration of Multiwavelength Erbium-Doped Fiber Laser Based on a Microfiber Knot Resonator

Single-Frequency Microfiber Single-Knot Laser

Stable Single-Longitudinal-Mode Erbium-Doped Fiber Laser with Narrow Linewidth Utilizing Parallel Fiber Ring Resonator Incorporating Saturable Absorber and Fiber Bragg Grating

A Wavelength Tunable Single Frequency Microfiber Laser

Stable Multi-Wavelength Erbium-Doped Fiber Laser Based on Dispersion-Shifted Fiber and Sagnac Loop Filter

A Microfiber Knot Incorporating a Tungsten Disulfide Saturable Absorber Based Multi-Wavelength Mode-Locked Erbium-Doped Fiber Laser

An Erbium-doped fiber laser based on a 3×3 microfiber coupler

Tunable Single-Wavelength Erbium-Doped Fiber Ring Laser Using a Large-Core Fiber

Stable and Switchable Single-Longitudinal-Mode Dual-Wavelength Erbium-Doped Fiber Laser Based on A Fiber Ring Filter

Stable and Uniform Multi-Wavelength Fiber Laser Based on Hybrid Raman and Erbium-doped Fiber Gains

Stable and Uniform Dual-Wavelength Erbium-Doped Fiber Laser Based on Fiber Bragg Gratings and Photonic Crystal Fiber

Gourd-shaped subring resonator-based single longitudinal mode erbium-doped fiber laser

Narrow Linewidth Single Frequency Microfiber Laser

Fabrication Of A New Kind Of Single Mode Large-Mode-Area Erbium-Doped Fiber And Its Applications

Widely Wavelength-Swept Single-Longitudinal-Mode Fiber Laser with Ultra-Narrow Linewidth in C+L-Band

Tunable Fiber Laser Using an Er/Yb Codoped Fiber Based Modal Interferometer Filter

A Single Longitudinal Mode Fiber Ring Laser Based on Cascaded Microfiber Knots Filter