Abstract:A multi-wavelength switchable C-band erbium-doped fiber laser based on a hybrid comb filter composed of a Sagnac loop and Mach–Zehnder interferometer (MZI) is designed and experimentally demonstrated. In the designed ring cavity fiber laser, the MZI is composed of bi-tapered single-mode fiber fabricated by etching with hydrofluoric acid. In the experiment, the wavelength intervals in the comb spectra of the Sagnac loop and MZI are 3.4 and 18.8 nm, respectively, and by combining the Sagnac loop and MZI, measurements of the hybrid comb spectrum are obtained. When the pump power is 91 mW, lasing occurs at 1529.2 nm. Adjustment of the variable attenuator (VA) can provide 1541.9 and 1558.6 nm single-wavelength switchable lasers, for which the maximum peak power difference is less than 3.59 dB, the signal-to-noise ratio (SNR) exceeds 19.25 dB, and the peak power fluctuation is less than 0.34 dB over a 30 min scan time at 26 °C. For dual-wavelength switchable laser emission, four different sets of wavelengths can be realized, and the SNR exceeds 15.57 dB with power fluctuations of less than 1.6 dB, under the same monitoring conditions. By further adjusting the VA, stable and tunable triple-wavelength lasing is also realizable; under these conditions, the SNR exceeds 15.02 dB and the power fluctuation is less than 0.91 dB. Furthermore, four- and five-wavelength lasing can also be achieved by adjusting the VA again, with SNRs exceeding 19.05 and 14.98 dB, respectively.

Demonstration of Multiwavelength Erbium-Doped Fiber Laser Based on a Microfiber Knot Resonator

Demonstration of Microfiber Knot Laser

Microfiber Knot Dye Laser Based on the Evanescent-Wave-Coupled Gain

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Stable Multi-Wavelength Erbium-Doped Fiber Laser Based on Dispersion-Shifted Fiber and Sagnac Loop Filter

A Microfiber Knot Incorporating a Tungsten Disulfide Saturable Absorber Based Multi-Wavelength Mode-Locked Erbium-Doped Fiber Laser

Multiwavelength Er-doped fiber laser using an all-fiber Lyot filter

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

Tunable and switchable multi-wavelength erbium-doped fiber ring laser based on a modified dual-pass Mach-Zehnder interferometer

Multiwavelength Erbium-Doped Fiber Laser Based on an All-Fiber Polarization Interference Filter

Wavelength-spacing continuously tunable multiwavelength erbium-doped fibre laser based on DSF and MZI

Stable Multi-Wavelength Erbium-Doped Fiber Laser by Using Dispersion-Shifted Fiber

Multi-wavelength switchable erbium-doped fiber laser based on a hybrid filter incorporating a bi-tapered Mach–Zehnder interferometer and Sagnac loop

Demonstration of Optical Microfiber Knot Resonators

An Erbium-doped fiber laser based on a 3×3 microfiber coupler

Multiwavelength Erbium-Doped Fiber Ring Laser Using a LiNbO 3 Multifunction Chip for Fiber Gyroscope

Multi-Wavelength Fiber Optical Parametric Oscillator with a Tunable Wavelength-Spacing

Individually Switchable and Widely Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Cascaded Mismatching Long-Period Fiber Gratings

Multiwavelength generation in an erbium-doped fiber laser using in-fiber comb filters

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

Multiwavelength Erbium-Doped Fiber Laser Based on Inhomogeneous Loss Mechanism by Use of a Highly Nonlinear Fiber and a Fabry-Perot Filter