Abstract:A higher available magnetic field can give more flexibility for significant research and constructions. Inserting feasible high-temperature-superconducting (HTS) magnet inside low-temperature-superconducting (LTS) external is becoming an efficient method to build ultra-high-field (UHF) magnets. However, HTS insert magnets exhibited concentration of magnetic strain during the energization, significantly owing to the screening-current effect. This phenomenon affect the structural integrity of HTS magnets, posing a difficulty for UHF magnets to reach a center field larger than 30 T. In this paper, we report the recent progress of the 35 T all-superconducting UHF magnet project. The full-cycle development of this homemade UHF magnet was a strong collaboration with multiple domestic institutions in China. We used commercial REBa2Cu3O7-x (RE = rare earth element, REBCO) conductors to wind the 20 T HTS insert. Specifically, we optimized the electromagnetic design of this HTS insert with consideration of screening-current induced strain. We applied the no-insulation and metal-as-insulation winding techniques simultaneously to balance the time constant of the two nested REBCO coils. During the excitation test, the HTS insert maintained a 256 A operation current as designed for nearly 18 hours. With the energization of LTS external magnet, the entire facility reached a center field larger than 20 T for 16 hours, 30 T for 6.35 hours and 32 T for 2 hours. It finally reached a 32.4 T center field, at which point the LTS external quenched, inducing the HTS insert to quench as well. After quench, the HTS magnet can maintained 229 A operation current during the postmortem standalone test. This 32.4 T result exhibits effectiveness of considering the screening-current induced strain to enhance the structural integrity of REBCO magnets, and verifies the high reliability of REBCO magnets by generating a long-duration high field environment without any quench accident originating from the REBCO magnet.

A 15-T Rebco Insert for A 30-T All Superconducting Magnet

Design, Fabrication, and Test of a 12 T REBCO Insert for a 27 T All-Superconducting Magnet

Design of a 20 T Class REBCO Insert in a 15 T Low Temperature Superconducting Magnet

Design and Preliminary Tests of a 20-T REBCO Insert Coil for a 35-T All Superconducting Magnet

Progress in the Construction of a 20 T REBCO Insert Coil for High-Field All-Superconducting Magnets

Development of YBCO Insert for a 25 T All Superconducting Magnet

Generation of 25 T with an all-superconducting magnet system: field profile and field quality measurements of a layer-wound 4 T REBCO insert coil for a 21 T LTS magnet

Conceptual design of a 33 T cryogen-free magnet REBCO insert: Mechanical aspects and Protection against Thermal Runaway

Test of an 8.66-T REBCO Insert Coil with Overbanding Radial Build for a 1.3-Ghz LTS/HTS NMR Magnet

High Temperature Superconducting YBCO Insert for 25 T Full Superconducting Magnet

Critical Current Analysis of an Ybco Insert for Ultrahigh-Field All-Superconducting Magnet

Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet

Strain analysis and preliminary test of an all-superconducting high-field magnet generating 32.4 T direct-current magnetic field

Design of a 15 T Hybrid Superconducting Magnet

Electromagnetic Design and Mechanical Behavior Analysis of an 850 MHz All REBCO Nuclear Magnetic Resonance Magnet

High Magnetic Field Superconducting Magnet System Up to 25 T for ExCES

26.86-tesla direct-current magnetic field generated with an all-REBCO superconducting magnet

Study on the Arrangement of REBCO Double-Pancake Coils with Different Critical Currents in 30-T Superconducting Magnets

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Numerical Analysis of Screening-Current Induced Strain in a 16 T REBCO Insert Within a 20 T Background Field

The Effect of Winding Conditions on the Stress Distribution in a 10.7 T REBCO Insert for the 25.7 T Superconducting Magnet