Abstract:An effective source reconstruction method (SRM) to predict the noise coupling from an unknown electromagnetic interference (EMI) source inside a shielding enclosure is proposed in this work. On account of the difficulty and time-consuming in phase measurement of near-field, the magnitude-only near-field scanning is employed to obtain the near-field above EMI sources in free space, and the leakage near-field from the slots and/or holes of a shielding enclosure after the EMI source is inserted into the enclosure. The infinitesimal dipole is used as the equivalent source of the EMI source. The proposed method can generally be divided into three steps. First, the positions and initial moments of the equivalent dipoles of an unknown EMI source without any shielding enclosure are derived by using dynamic differential evolution (DDE) algorithm. Second, the obtained dipoles are thereafter placed into an arbitrarily shaped shielding enclosure, and the full-wave simulation is implemented to build the relationship between the dipoles and the measured leakage field from the slots/holes of the shielding enclosure. Third, the dipole moments are thereby optimized by using the DDE method again based on the magnitude-only leakage field. It is worth highlighting that only a relatively small region of near-field on the leakage plane is sufficient for obtaining an effective equivalent dipole model in the shielding enclosure. The results of numerical simulation and physical measurement have verified the effectiveness of the proposed SRM for modeling unknown EMI sources in a shielding enclosure.

Worst-Case Disturbances On A Shielded Electronic System With An Antenna By An External Emi

Shielding Characterization Of Metallic Enclosures With Multiple Slots And A Thin-Wire Antenna Loaded: Multiple Oblique Emp Incidences With Arbitrary Polarizations

System-level SPICE model for predicting the effects of external incident EMI on a shielded communication system with an antenna

A Systematic Coupled Approach For Electromagnetic Susceptibility Analysis Of A Shielded Device With Multilayer Circuitry

Accurate Characterization. of Shielding Effectiveness of Metallic Enclosures with Thin Wires and Thin Slots

Characterization of Mutual Coupling Effects among Multi-Antennas Mounted on a Perfect Electrically Conducting (PEC) Tower Platform in the Presence of Intentional Electromagnetic Pulses (Iemps)

Wideband Pulse Responses Of Metallic Rectangular Multistage Cascaded Enclosures Illuminated By An Emp

Shielding Effectiveness Characterization Of Metallic Enclosures With A Thin-Sheet Panel Illuminated By A Arbitrary Polarizations High-Power Emp

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

Breakdown Predictions of Microstrip Interconnects and Coplanar Waveguide-Built Devices in the Presence of HP-EMPs

Investigation on Time- and Frequency-Domain Responses of Some Complex Composite Structures in the Presence of High-Power Electromagnetic Pulses

PCB Electromagnetic Interference Modelling Based on Reciprocity Theorem

Electromagnetic Susceptibility Analysis In Device Level With Numerical Technique Based On Electric Field Integral Equation

Near-Field Scanning Based Shielding Effectiveness Analysis of System in Package

Prediction Of Pcb Radiated Emission In Shielding Cavity Using Equivalent Dipole Modeling

Electromagnetic topology analysis on relation between electromagnetic interference inside equipment and external electrostatic discharge

Electromagnetic Interference Suppression Technology for Miniaturized Microwave Cavities Based on Noise Suppression Sheet(NSS)

Electromagnetic susceptibility analysis of high speed circuit inside the shielding enclosure with an aperture

Noise Coupling Prediction Inside a Small Shielding Box Based on Phaseless Near-Field Scanning

A Source Reconstruction Method for Unknown EMISources Inside a Shielding Enclosure Based Onmagnitude-Only Near-Field Scanning

Electromagnetic Interaction Analysis Between Planar Antenna and Transmission Line