Abstract:Atom probe tomography (APT) combined with electron back scatter diffraction and transmission electronic microscopy (TEM) is utilized to characterize the nature of copper precipitation during austenite–ferrite transformation in a continuous cooling high-strength low-alloy steel. The copper precipitation manners in association with the austenite decomposition kinetics are studied. The prevailing microstructure of the continuous cooling steel consists of acicular ferrite (AF), which is formed at an intermediate cooling rate of 10 °C/s. Besides, a limited volume of polygonal ferrite (PF) because of fast cooling rate and a trace of retained austenite are detected. Numerous copper-rich phase is found by TEM observation both in highly dislocated AF and dislocation-free PF. Generally, the copper-rich precipitates have comparatively large sizes and are considered to be formed by interphase precipitation during austenite–ferrite transformation. A high number density of nanometre sized copper-rich clusters that are lack of diffraction contrast in conventional TEM observation are detected by APT. These smaller copper-rich clusters, which are usually located between the linear-arranged copper-rich precipitates, are considered to be formed from supersaturated solid solution after the cessation of austenite–ferrite transformation. That means an ageing reaction for Cu precipitation occurs during continuous cooling transformation. The copper-rich precipitates and clusters are both rich in nickel, manganese and iron.

Direct Observations on the Crystal Structure Evolution of Nano Cu-Precipitates in an Extremely Low Carbon Steel

Investigation of the Crystallographic Evolution Sequence of Nano-Precipitation via HRTEM in Cu-Bearing Ultra-Low Carbon Steel

Direct Observation of A Fast Single-Crystal-To-Single-Crystal Transformation from A Cu(Ii-)Framework to A Cu-I-Chain Mediated by Ascorbic Acid

High-resolution Transmission Electron Microscopy Characterization of the Structure of Cu Precipitate in a Thermal-aged Multicomponent Steel

Nanoscale Cu particle evolution and its impact on the mechanical properties and strengthening mechanism in precipitation-hardening stainless steel

Deformation of Fe and Ag Precipitates in Cu Matrix

Double Diffraction or ω-Fe Diffraction in Body-Centered Cubic {112}<111>-Type Twinned Martensite

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Microstructure evolution of super-cooled Cu-Ni-Fe alloy

A TEM Study of the Crystallography of Austenite Precipitates in a Duplex Stainless Steel

Direct observation of Cu interphase precipitation in continuous cooling transformation by atom probe tomography

Atomic Scale Insights into the Rapid Crystallization and Precipitation Behaviors in FeCu Binary Alloys

Double Diffraction or -Fe Diffraction in Body-Centered Cubic {112}?111?-Type Twinned Martensite

Atomic-scale study on core-shell Cu precipitation in steels: atom probe tomography and ab initio calculations

Novel Ultrafine Fe(C) Precipitates Strengthen Transformation-Induced-plasticity Steel

A Molecular Dynamics Study of an Hcp-To-Fco Martensitic Transformation and Its Crystallographic Correlation in A Ti Lattice, Upon Dissolution of Cu Atoms

Crystallography and diffraction patterns of the precipitates in Cu-3 wt% Ti alloy

Correlation of Cu precipitation with austenite–ferrite transformation in a continuously cooled multicomponent steel: An atom probe tomography study

In Situ Atomic Observation of Transformation Twinning in Nanocrystals

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Cu precipitation on dislocation and interface in quench-aged steel