Abstract:Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement.

An Algorithm for Determining the Peak Frequency of BOTDR under the Case of Transient Interference

Cross Correlation Peak-Seeking Technique of BOTDR Based on the Incomplete Brillouin Spectrum

High-Precision Measurement of Brillouin Frequency Shift in Brillouin Optical Time-Domain Reflectometer Based on Half-Peak Fitting Algorithm of Power Spectrum

Reverse Peak Of Brillouin Spectrum In Botda Sensor

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

Compensation of the frequency fluctuations of light sources in distributed Brillouin sensor.

Brillouin Optical Time Domain Analysis Incorporating with Backward Rayleigh Light Detection.

Efficient two-stage strain/temperature measurement method for BOTDA system based on Bayesian uncertainty quantification

Performance analysis of frequency shift estimation techniques in Brillouin distributed fiber sensors

Application of the joint algorithm of smooth pseudo Wigner-Ville distribution and four-parameter particle swarm optimization to BOTDR

Wideband Dectection Of Spontaneous Brillouin Scattering Spectrum In Brillouin Optical Time-Domain Reflectometry

Brillouin Optical Time Domain Reflectometry Using a Reference Brillouin Ring Laser

Extraction of Double-Peak Brillouin Frequency Shift Based on ANN for Nonuniform Strain Within BOTDR Spatial Resolution

Strain Variation Measurement with Short-Time Fourier Transform-Based Brillouin Optical Time-Domain Reflectometry Sensing System

SNR enhancement in Brillouin optical time domain reflectometer using multi-wavelength coherent detection

A Wavelength-Scanning Brillouin Optical Time Domain Reflectometer

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

Improvement of spatial resolution of Brillouin optical time domain reflectometer using spectral decomposition

Brillouin Frequency Shift Extraction Based on AdaBoost Algorithm

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Novel scanning method for distortion-free BOTDA measurements