Abstract:Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement.

Compensation of the frequency fluctuations of light sources in distributed Brillouin sensor.

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Brillouin optical time-domain analysis enhanced by forward stimulated Brillouin scattering: proof-of-concept demonstration

Novel scanning method for distortion-free BOTDA measurements

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Stabilizing Brillouin fiber laser for applications in distributed BOTDA sensing

Study on the Technique of Brillouin Scattering Distributed Optical Fiber SensingBased on Optical Interferometric Heterodyne Detection

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Performance analysis of frequency shift estimation techniques in Brillouin distributed fiber sensors

Benefits of Spectral Property Engineering in Distributed Brillouin Fiber Sensing

Distributed optical fiber sensing based on the combination of Brillouin and Rayleigh scattering

High-Performance Distributed Brillouin Optical Fiber Sensing

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

A Wavelength-Scanning Brillouin Optical Time Domain Reflectometer

Efficient two-stage strain/temperature measurement method for BOTDA system based on Bayesian uncertainty quantification

Design and Realization of Briliouin Optical Time Domain Reflectometer with 34km in Sensing Length

Compensating Model of Nonlocal Effects in a Brillouin Optical Time-Domain Analysis System

Distributed Brillouin frequency shift extraction via a convolutional neural network

A Cost-Effective Optical Fiber Sensor Network Exploiting Brillouin Beat Frequency Shift

Using Pulse with A Dark Base to Achieve High Spatial and Frequency Resolution for the Distributed Brillouin Sensor

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation