Abstract:Conventional single-mode fiber (SMF) Brillouin optical time-domain reflectometry (BOTDR) suffers from a low signal-to-noise ratio (SNR) and severe sensing reliability due to the influence of the stimulated Brillouin scattering threshold and bend loss. In this study, a simple and low-cost distributed sensing structure, with a single-mode input fiber alignment fusion and a 50 μm diameter graded index multimode sensing fiber, is designed, and the SNR characteristic is investigated. Through theoretical derivation and experimental verification, a higher SNR and excellent bending resistance are realized in BOTDR. The experimentally measured improvements in the SNR of the proposed sensing structure over the SMF at the beginning and end of a 5 km fiber are 2.5 dB and 1.3 dB, respectively. The minimum bending radius of the sensing structure is 2.25 mm, which is much better than that of the SMFs. The bidirectional optical losses between the SMF and the 50 μm graded index multimode fiber are measured by a simple experiment system and are 0.106 dB and 1.35 dB, respectively. The temperature-sensing characteristics of the sensing structure are measured by the self-built frequency-shift local heterodyne BOTDR sensor, and the measured temperature sensitivity and accuracy are 0.946 MHz/°C and 1 °C, respectively. The design provides a reference for BOTDR with a high SNR and has great potential for structural safety and health monitoring of infrastructures.

SNR enhancement in Brillouin optical time domain reflectometer using multi-wavelength coherent detection

Improving the Spatial Resolution and Signal-to-noise Ratio of BOTDR Using Double-Pulse Coding

Brillouin Optical Time-Domain Reflectometry Based on Hadamard Sequence Probe Pulse

Brillouin Optical Time-Domain Reflectometry Using Up-Conversion Single-Photon Detector

Wideband Dectection Of Spontaneous Brillouin Scattering Spectrum In Brillouin Optical Time-Domain Reflectometry

Photon-counting Brillouin optical time-domain reflectometry based on up-conversion detector and fiber Fabry-Perot scanning interferometer

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

Brillouin Optical Time Domain Reflectometry Using a Reference Brillouin Ring Laser

Single-Mode Input Fiber Combined with Multimode Sensing Fiber Used in Brillouin Optical Time-Domain Reflectometry

A Wavelength-Scanning Brillouin Optical Time Domain Reflectometer

Fast Acquirable Brillouin Optical Time-Domain Reflectometry Based on Bipolar-Chirped Pulse Pair

Polarization Insensitive Coherent Detection for Brillouin Scattering Spectrum in BOTDR

Enhancing spatial resolution of BOTDR sensors using image deconvolution

Improvement of Spatial Resolution for BOTDR by Iterative Subdivision Method

Enhancing the Performance of BOTDR Based on the Combination of FFT Technique and Complementary Coding.

Spatial-division Multiplexed Hybrid Raman and Brillouin Optical Time-Domain Reflectometry Based on Multi-Core Fiber.

Probe Pulse Design in Brillouin Optical Time‐domain Reflectometry

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Brillouin Optical Time Domain Analysis Incorporating with Backward Rayleigh Light Detection.

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

SNR-Enhanced Fast BOTDA Combining Channel Estimation Technique with Complementary Pulse Coding