Abstract:We proposed and experimentally demonstrated a few mode fiber (FMF) based Raman distributed temperature sensor (RDTS) to extend the sensing distance with enhanced signal-to-noise ratio (SNR) of backscattered anti-Stokes spontaneous Raman scattering. Operating in the quasi-single mode (QSM) with efficient fundamental mode excitement, the FMF allows much larger input pump power before the onset of stimulated Raman scattering compared with the standard single mode fiber (SSMF) and mitigates the detrimental differential mode group delay (DMGD) existing in the conventional multimode fiber (MMF) based RDTS system. Comprehensive theoretical analysis has been conducted to reveal the benefits of RDTS brought by QSM operated FMFs with the consideration of geometric/optical parameters of different FMFs. The measurement uncertainty of FMF based scheme has also been evaluated. Among fibers being investigated and compared (SSMF, 2-mode and 4-mode FMFs, respectively), although an ideal 4-mode FMF based RDTS has the largest SNR enhancement in principle, real fabrication imperfections and larger splicing loss degrade its performance. While the 2-mode FMF based system outperforms in longer distance measurement, which agrees well with the theoretical calculations considering real experimental parameters. Using the conventional RDTS hardware, a 30-ns single pulse at 1550nm has been injected as the pump; the obtained temperature resolutions at 20km distance are estimated to be about 10°C, 7°C and 6°C for the SSMF, 4-mode and 2-mode FMFs, respectively. About 4°C improvement over SSMF on temperature resolution at the fiber end with 3m spatial resolution within 80s measuring time over 20km 2-mode FMFs have been achieved.

Spatial-division Multiplexed Hybrid Raman and Brillouin Optical Time-Domain Reflectometry Based on Multi-Core Fiber.

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Spatial-division Multiplexed Hybrid Raman and Brillouin Distributed Sensor Employing Multicore Fiber

Towards Large Dynamic Range and Ultrahigh Measurement Resolution in Distributed Fiber Sensing Based on Multicore Fiber.

Single-Mode Input Fiber Combined with Multimode Sensing Fiber Used in Brillouin Optical Time-Domain Reflectometry

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

Hybrid Distributed Fiber-Optic Sensing System by Using Rayleigh Backscattering Lightwave As Probe of Stimulated Brillouin Scattering

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing

Direct and Simultaneous Detection of Temperature and Strain Using Combined Brillouin and Raman Backscatters in Single Mode Fiber

Simultaneous Measurements of Distributed Temperature and Discrete Strain Based on Hybrid Raman/FBG System

A Hybrid Raman/FBG Sensing System for Simultaneous Measurement of Temperature and Strain

Proposal and Experiment of Bocdr - Brillouin Optical Correlation-Domain Reflectometry

Single-end hybrid Rayleigh Brillouin and Raman distributed fibre-optic sensing system

High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing Based on Modulated Pulses

Few-mode Fiber Based Raman Distributed Temperature Sensing.

Photon-counting Brillouin optical time-domain reflectometry based on up-conversion detector and fiber Fabry-Perot scanning interferometer

Monolithic Multicore Fiber Based Multi-Parameter Measurement Based on Spatial-Division-multiplex Sensing Mechanisms

A Hybrid Sensing System for Simultaneous Raman-based Distributed and FBG-based Quasi-Distributed Measurements

Multi-parameter distributed fiber sensing system based on hybrid Rayleigh and Brillouin scattering

Distributed Vibration Sensor Based on Space-Division Multiplexed Reflectometer and Interferometer in Multicore Fiber