Abstract:Blending type of ABS with different polybutadiene rubber (PB) and polyacrylonitrile (AN) contents in SAN phase is prepared at 240 degrees C to study the effects of PB and AN content on the structure and the properties of DB/ABS blends. Different kinds of productive ABS along with the blend-type ABS are used to compare the properties of PC/ABS and DB/ABS blends comprehensively. All blends are made by melt blending for 10 min with sheer rate of 30 r/min. The result shows that, in DB/Blend-type ABS (70/30) blends, PB content exhibits significant influence on the tensile properties. Samples with 6.3 wt% of PB always show the best performance both in yield strength and elongation at break when AN content is fixed at 18 wt%, 25 wt% and 30 wt%; while increasing AN content in the sample with the same PB content would result in better blends properties even not so obvious as PB content. Scanning electron microscopy gives exactly the same trend for phase morphology with PB and AN contents, revealing best uniform scale of dispersed phase (ABS) among 0.5 - 1.2 mu m at 6.3 wt% of PB. Thermal gravimetric analysis shows that all DB/ABS blends have good thermal stability, which is not obviously affected by PB content and AN content. Single peak of glass transition shows good compatibility in the DB/ABS blends. Excellent compatibility of DB with ABS in the sample is exhibited through dynamic mechanical analysis. The glasstransition temperature of DB/ABS blends are closed to that of DB, mildly affected by PB and AN content. Besides, both blending type ABS and different kinds of productive type ABS are used to compare the properties of DB/ABS blends and traditional bisphenol-A-type PC/ABS blends. Basic laws of tensile properties in DB/ABS remain the same as in PC/ABS blends using different types of ABS.

Relationship Between Microstructure and Optical Properties of PC/SAN Blend and Property Optimization

In-situ Preparation of Core-Shell-like Scatterers and Their Effects on Optical and Mechanical Properties of PC-matrix Light Diffusing Materials

Visualization of Poly(ether Imide) and Polycarbonate Blending in an Internal Mixer

Morphology and Mechanical Behaviors of Rigid Organic Particles Reinforced Polycarbonate

In Situ Formation of Compound Eye-like SAN-OSB Composite Microspheres by Melt-Blending Method: Enhancing Multiple-Scattering Effect

Optical characteristics and mechanism analysis of polycarbonate/poly(1,4-cyclohexanedimethyl-1,4-cyclohexanedicarboxylate) blends

Effect of Styrene–acrylonitrile on the Electrical Resistivity of Polycarbonate/multiwalled Carbon Nanotube Composites

Miscibility, morphology and fracture toughness of tetrafunctional epoxy resin/poly (styrene-co-acrylonitrile) blends

Molecular Simulation of Miscibility of Poly(2,6‐dimethyl‐1,4‐phenylene Ether)/poly(styrene‐co‐acrylonitrile) Blend with the Compatibilizer Triblock Terpolymer SBM

Phase Separation Of Poly(Methyl Methacrylate)/Poly(Styrene-Co-Acrylonitrile) Blends With Controlled Distribution Of Silica Nanoparticles

Blending ABS resin and its effect on structure and properties of PC/ABS BLEND alloy

Filler Effects on the Phase Separation Behavior of Poly (methyl Methacrylate)/poly (Styrene-Co-acrylonitrile) Binary Polymer Blends

Structure and Properties of Isosorbide type Polycarbonate/ABS Blend

Miscibility, Morphology and Fracture Toughness of Epoxy Resin/poly(styrene-Co-acrylonitrile) Blends

Miscibility and Morphology of AB/C‐type Blends Composed of Block Copolymer and Homopolymer or Random Coploymer, 2. Blends with Random Copolymer Effect

Crystallization Behavior and Hydrophilicity of Poly(vinylidene Fluoride) (pvdf)/poly(methylmethacrylate) (Pmma)/poly(styrene- Co -Acrylonitrile) (SAN) Ternary Blends

Preparation and Properties of PC/SAN Alloy Modified with Styrene‐ethylene‐butylene‐styrene Block Copolymer

Studies on Polycarbonate/polystyrene/polycarbonate-G-polystyrene Blends. III. Optical Properties of PC/PS/PC-g-PS Blends

Studies on Polycarbonate/polystyrene/polycarbonate-Graft-polystyrene Blends. II. Compatibility and Morphology of PC/PS/PC-g-PS Blends

Microstructure, Interfacial Interactions, and Rheological Properties of PC/AES/Montmorillonite Composites

In situ polymerization preparation of blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitrile)