Abstract:The phase behavior of diblock copolymer AB/homopolymer C blends in solution was studied by simulated annealing method. The study was focused on the compatibilization between the homopolymer and the copolymer with repulsive interactions due to the addition of solvent. We investigated the amount of solvent (characterized by the concentration of the polymer segments Phi), the volume fraction f(c) of the homopolymer C, the ratio of homopolymer chain length to the copolymer chain length X, the repulsion between C and A or B segments, epsilon(AC) and epsilon(BC), and the attraction between solvent and C on the phase behavior of the blending system. We built phase diagrams in the space of F and fc at different X. Studies have shown that when X is less than 0.5, and the values of epsilon(AC) and epsilon(BC) are not very large, the addition of solvent strongly selective to A and C segments can improve the compatibility of the system. In solution, lamellae, gyroids, cylinders in layers, core-shell cylinders and cylindrical structures are formed. Moreover, the structure of cylinders in layers has not been observed in the neat diblock copolymer system. C-segments are distributed at the interfaces between A/B domains at high F region, while they are inside the A domain at low F region. Short homopolymer chains are easily compatible with diblock copolymers. Macroscopic phase separation has taken place in long homopolymer chains even with a small amount of homopolymer added. Moreover, increasing the values of epsilon(AC) and epsilon(BC) will reduce the compatibility of the system. The transformation between different phases and that from microphase separation to macrophase separation are the results of the competition between the energy and entropy of the system. The macrophase separation in the solution system is different from that in the melt system. Some C-segments are at the interface of AB domains to reduce the contact between A and B segments in the solution system, while all C-segments are separated from the AB domains in the melts.

Miscibility and Morphology of AB/C‐type Blends Composed of Block Copolymer and Homopolymer or Random Coploymer, 2. Blends with Random Copolymer Effect

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

Miscibility and Morphology of Ab/C-Type Blends Composed of Block-Copolymer and Homopolymer or Random Copolymer .1. Polyisoprene-Block-Poly(Methyl Methacrylate) Modified Polystyrene Blends

Investigation on the Miscibility of the Blends of Poly(methyl Methacrylate) and Poly(styrene‐co‐acrylonitrile)

Tuning polymer blends to cocontinuous morphology by asymmetric diblock copolymers as the surfactants

Solvent-Induced Morphology of the Binary Mixture of Diblock Copolymer in Thin Film: the Block Length and Composition Dependence of Morphology

Molecular Simulation of Miscibility of Poly(2,6‐dimethyl‐1,4‐phenylene Ether)/poly(styrene‐co‐acrylonitrile) Blend with the Compatibilizer Triblock Terpolymer SBM

Studies on Polymer Blends with Moderate Specific Interactions. 2. Phase Structure of Blends SAN/TPU and SAN/TPU/EVA

Crystallization Behavior and Hydrophilicity of Poly(vinylidene Fluoride) (pvdf)/poly(methylmethacrylate) (Pmma)/poly(styrene- Co -Acrylonitrile) (SAN) Ternary Blends

Effect of the Nature of Annealing Solvent on the Morphology of Diblock Copolymer Blend Thin Films

Miscibility, Morphology and Fracture Toughness of Epoxy Resin/poly(styrene-Co-acrylonitrile) Blends

Controllable Specific Interactions and Miscibility in Polymer Blends .2. A Brief Description of the Main Results

Miscibility, morphology and fracture toughness of tetrafunctional epoxy resin/poly (styrene-co-acrylonitrile) blends

The Compatibility and Crystallization of the Mixtures of Poly (Tetrahydrofuran-B-methyl Methacrylate) Diblock Copolymer with Polyvinyl Chloride Homopolymer

Miscibility and Crystallization Behavior in Blends of Poly(methyl Methacrylate) and Poly(vinylidene Fluoride): Effect of Star‐like Topology of Poly(methyl Methacrylate) Chain

Compatibilization of Blends of Polybutadiene and Poly(Methyl Methacrylate) with Poly(Butadiene-Block-Methyl Methacrylate)

A Simulation Study of Enhancing the Compatibility in Block Copolymer AB/Homopolymer C Blends by Solvents

In situ polymerization preparation of blends of poly(methyl methacrylate) and poly(styrene-co-acrylonitrile)

Influence of Block Lengths and Symmetries of Block Copolymers on Phase Behavior of Polymer A/polymer B/block Copolymer Ternary Blends

A polymer of bisphenol A and bisphenol A diglycidyl ether and its blends with poly(styrene-co-acrylonitrile):In situ polymerization preparation, morphology, and mechanical properties

Compositional Asymmetry in a Crystalline-Amorphous Block Copolymer Influences the Phase and Crystallization Behaviors of Its Blend with an Amorphous Block Copolymer