Abstract:We successfully synthesized Cu@Ag NPs paste, and they were successfully applied for joining Cu/Cu@Ag NPs paste/Cu firstly in air by the ultrasonic-assisted sintering (UAS) at a temperature of as low as 160 degrees C. Their sintered microstructures featuring with dense and crystallized phases are completely different with the traditional thermo-compression sintering. The shear strength of the joints reached to 54.27 MPa, exhibiting one order of magnitude higher than thermocompression sintering (TCS) at the same temperature (180 degrees C). This ultra-low sintering temperature and high performance of the sintered joints were ascribed to ultrasonic effects and systematically investigated. The ultrasonic vibrations had distinct effects on the metallurgical reactions of the joints, resulting in the contact and growth of Cu core and the stripping and connection of Ag shell, which contributes to the high shear strength. For the TCS, the sintering process can be characterized by two stages. Stage I includes the neck formation and growth among Ag layers through surface diffusion. This initial sintering of NPs does not require much thermal activation, so it can be obtained at a low temperature with weak bonding and the sintering rate is very low because of thinner Ag shells on Cu@Ag NPs. With the increase of temperature, part of core-shell nanoparticles would loss the shell and the Cu cores with fresh surfaces would be exposed and contact with others, leading to the occurrence of the Cu NPs sintering, which would step into the Stage II. Because of lower input energy, this Cu NPs sintering took place very limit. However, regarding to the UAS, due to overwhelming effects caused by the application of ultrasonic, the "dewetting" of Ag shells appears since the sharp increase of temperature, resulting in that the sintering process quickly reaches to the stage II. In this stage, the thin Ag shells shrink into tiny nodules on the Cu core surface, leading to fast sintering of the NPs. Because the tiny Ag nodules have extremely large surface to volume ratio, the starting temperature of sintering dramatically decreases based on the thermodynamic theory. Such low temperature sintering in air of Cu@Ag NPs to form die attachments with robust performances can be successfully applied in the fields of high power, auto electronics and harsh environmental device packaging.

Synthesis and Characterization of Ultra-Fine Bimetallic Ag-Cu Nanoparticles As Die Attach Materials

Effects of Temperature and Dispersants on the Phases and Morphology of Ag–Cu Nanoparticles

Low temperature nanojoining of silver–copper nanopaste as die attach material for high temperature packaging

Low Temperature Bonding of Cu Metal through Sintering of AgNanoparticles for High Temperature Electronic Application

The Synthesis of Cu-Ag Core-Shell Bimetallic Nanoparticles for IC Bonding

Ultra-low Temperature Sintering of Cu@Ag Core-Shell Nanoparticle Paste by Ultrasonic in Air for High-Temperature Power Device Packaging.

Atomic Insights into the Sintering Behaviour of Ag-Cu Solid Solution Nanoparticles on Ag Substrate

Cu-Cu bonding by Ag nanostructure at low temperature of 180 °C

Synthesis with Glucose Reduction Method and Low Temperature Sintering of Ag-Cu Alloy Nanoparticle Pastes for Electronic Packaging

Cu-Cu Bonding By Ag Nanostructure At Low Temperature Of 180 Degrees C

Synthesis and Characterization of Highly-Dispersed Copper Submicron Particles for Low Temperature Sintering Joints

Low Temperature Bonding Process Using Mixed Cu-Ag Nanoparticles for Electronic Packaging

Microwave-assisted Synthesis of Mo–Cu Nano-Powders at an Ultra-Low Temperature and Their Sintering Properties

Low Temperature Fine-pitch Cu-Cu Bonding Using Au Nanoparticles As Intermediate

Low Temperature Sintering of Silver Nanoparticle Paste for Electronic Packaging

Mechanism of Ultrasonic-Assisted Sintering of Cu@Ag NPs Paste in air for High-Temperature Power Device Packaging

Low Temperature Cu-Cu Bonding Using Ag Nanoparticles By Pvd

Low-Temperature Cu-Cu Bonding Using Silver Nanoparticles Fabricated by Physical Vapor Deposition

Bonding of Cu to Cu bulks through the low temperature sintering of Ag nanoparticle paste

Polymer-Protected Cu-Ag Mixed NPs for Low-Temperature Bonding Application

Superior Strength and Strengthening Mechanism of Die Attachment Joints by Using Bimodal-Sized Cu Nanoparticle Paste Capable of Low-Temperature Pressureless Sintering