Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Impact of Gedeon streaming on the efficiency of a double-inlet pulse tube refrigerator

CFD analysis of nonlinear processes in pulse tube refrigerators: Streaming induced by vortices

Influence of Gedeon Streaming on Performance of Four-Stage Travelling-Wave Thermoacoustic Engine

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Investigation on High-Performance Single-Stage GM-Type Pulse Tube Cooler

Effect of Gedeon streaming on thermal efficiency of a travelling-wave thermoacoustic engine

DC FLOW SUPPRESSION IN A SINGLE-STAGE G-M TYPE PULSE TUBE COOLER

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Generation Mechanism of DC Flow in Double-Inlet Pulse Tube Coolers

STUDY ON A THERMOACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR OPERATING AT 124K

Quantitative investigation on Gedeon streaming in traveling wave thermoacoustic engine

Advances in Thermoacoustic Engine and Its Application to Pulse Tube Refrigeration

EXPERIMENTAL STUDY ON THERMO ACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR WITH MIXTURES

Influence of heat bridge on performance of thermally coupled two-stage Stirling-type pulse tube refrigerator

A 115 K thermoacoustically driven pulse tube refrigerator with low onset temperature

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Thermal performance of a single stage double inlet pulse tube refrigerator: experimental investigation and CFD simulation

Investigation on gedeon streaming in a traveling wave thermoacoustic engine

Experimental investigation on pulse tube refrigerator with binary mixtures

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids