Abstract:Taking C.I. Disperse Blue 79 as the simulation object, the dispersion mechanism of polycarboxylic acid dispersant (poly(SMA-g-IP-MPEG)) for disperse dyes was studied by molecular dynamics simulations. The results show that the hydrophilicity of the dispersant mainly depends on the maleic acid residues; the ionized carboxylate groups of the maleic acid residues provide negative charges that make the dyes repel each other; the hydrophobicity of the styrene residues is the driving force that makes the dispersants adsorb to the dye surfaces; the branched chains grasp the dye crystals like claws, which make the dispersants combine with the dye crystals better. When the ratio of main chain monomer is 3:1 and the branched chain length is larger than 12, the branched chain tends to wrap around the main chain. The repulsion between dyes decreases, thus the dispersion performance becomes worse. When the ratio of main chain monomer is 1:1, the dispersion effect increases with the increase of branched chain length. But when the branched chain length increases to 16, the longer branched chain can adsorb with two dye crystals at the same time, which leads to the decrease of dispersion effect. In general, the main chain monomer ratio had little influence on the dispersion effect. The dispersant with the main chain monomer ratio of 1:1 and the branch chain length of 12 had the best dispersion effect on the dye. The experimental results verified the correctness of the simulation results. The design of polymeric dispersants for disperse dyes should consider not only the improvement of hydrophilicity and charge repulsion to maintain the dispersion stability of disperse dyes in water, but also the binding force between dispersants and disperse dyes. The two interactions determine the dispersion performance of the dispersant for disperse dyes.

Influence of Comb-Like Copolymer Dispersants with Different Molecular Structures on the Performance of Caco3 Suspension in Organic System

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Effects of Comb Copolymer Paa-G-Mpeo on Rheological and Dispersion Properties of Aqueous Caco3 Suspensions

Effects of Chemical Structure on the Properties of Carboxylate‐type Copolymer Dispersant for Coal‐water Slurry

Effect of the length of the side chains of comb-like copolymer dispersants on dispersion and rheological properties of concentrated cement suspensions.

Effect Of St/Aa Copolymer Composition On The Crystallization Behavior And Morphogenesis Of Caco3

Effect of comb polymer dispersants with different molecular structures on the performance of LiFePO4 suspensions

Suspension Swelling Graft Copolymerization of Acrylonitrile-Chlorinated Polyethylene-Styrene:Function of Composite Suspending Agents

Preparation and property analysis of polyacrylate dispersant for calcium carbonate

Effect of Dispersants on the Stability of Calcite in Non-Polar Solutions

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Study of structure–performance relationships of polymeric dispersants on particle dispersion and stabilisation

Study on the dispersion mechanism of the polycarboxylic acid dispersant for disperse dyes

Synthesis of Dispersant with Comb-Structure with Application to Copolymerization of Styrene and Divinylbenzene

Comb polymer with ionic side chains as a novel dispersant for cement slurries: Synthesis, characterization and working mechanism

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

Study on the Effect of Main Chain Molecular Structure on Adsorption, Dispersion, and Hydration of Polycarboxylate Superplasticizers

Synthesis of a novel amphoteric copolymer and its application as a dispersant for coal water slurry preparation

Effect of Dispersant on the Dispersibility of CaO–Al2O3-Based Mold Powder Slurry

Poegma-B-Paa Comb-Like Polymer Dispersant For Al-2 Suspensions