Simulation Study on Heat and Mass Transfer Characteristics Within Tubular Moving Bed Heat Exchangers
Weiqin Lu,Zhihan Li,Xueyu Tang,Dinghe Liu,Xiwei Ke,Tuo Zhou
DOI: https://doi.org/10.1016/j.csite.2024.105008
IF: 6.268
2024-01-01
Case Studies in Thermal Engineering
Abstract:In the field of waste heat recovery, tubular moving bed heat exchangers (MBHEs) hold great promise as equipment capable of effectively handling large-sized granular materials with high temperature. To further clarify the heat and mass transfer characteristics within tubular MBHEs, this study firstly conducted detailed investigations on the contributions of different heat transfer mechanisms. The result shows that heat radiation (∼45%) and gas film heat conduction (∼42%) control the heat transfer processes involving tube walls, with an inlet particle temperature of 600 °C, tube wall temperature of 50 °C, and particle descent velocity of 2 mm/s. These contributions can be influenced by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. Additionally, for a specific particle, its heat transfer state is highly depended on where it is located. Subsequently, the time-varying and space-varying characteristics of the heat transfer processes involving tube walls are studied. The results suggest that the time-varying and space-varying characteristics are inherent in tubular MBHEs due to the difficulty to achieve complete stability. Meanwhile, temporal fluctuations intensify with an increase in the inlet particle temperature, a decrease in wall temperature, or an increase in particle descent velocity. The result of power spectral density (PSD) indicates that the heat transfer processes exhibit a degree of chaotic behavior due to the nonlinear property of sub-models, as well as the randomness in particle feeding and contacts. The space-varying characteristic is mainly determined by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. This characteristic can be observed in both the axial and circumferential directions, with the circumferential variation being more pronounced than the axial variation. Furthermore, a double-tube MBHE, a topic that has received scant attention in previous research, is investigated in comparison to a single-tube MBHE to explore the differences in heat and mass transfer between the two configurations. It indicates that under the same boundary conditions, there are differences in heat transfer results, which are attributed to the interactions between two vertically arranged tubes. These interactions are reflected in the reconstruction of particle flow patterns and the effect altering the temperature distribution for the particles or fluid surrounding the tubes. The obtained results provide valuable insights into the mass and heat transfer behaviors of particles and fluids within tubular MBHEs, laying a foundation for advancing the development of efficient tubular MBHEs.