Abstract:An investigation was conducted on the foaming formula and production technique of polyethylene terephthalate (PET) using orthogonal design analysis and Box–Behnken response surface analysis. PET was combined with polyolefin elastomer (POE) and filled with surface‐treated mica, quartz, and graphene oxide (GO). POE served as a carrier and modifier for the foaming agent, as well as a toughening agent. The addition of fillers can improve the thermal properties of PET foaming material. To do this, the blending process includes using a microsphere foaming agent on an open mill at a low temperature of 50°C for 5–6 min. After this, dicumyl peroxide (DCP) and antioxidant are added for 1 min before the specimens are removed from the open mill and flattened. The next step involves placing the specimens in a plate vulcanizing machine at 265°C and 10 MPa for 10 min to initiate the foaming process. The PET foam obtained has a density of 0.4–0.5 g/cm 3 , a tensile strength of 5–6.8 MPa, an elongation at break of 64–276%, and a tear strength of 5.1–14.5 N/m. Scanning electron microscope (SEM) images reveal that the PET foam contains micron‐sized cells, with measurements ranging from about 107 to 273 μm. The tested samples showed that the PET foam with 50 phr of POE, 7 phr of foaming agent, and 5 phr of mica exhibited relatively good mechanical properties, including tensile strength, elongation at break, and tear strength. The thermogravimetric analysis (TGA) indicated that the thermal properties of PET foam are better than those of pure PET. The modified PET foam has many applications due to its low density and excellent properties. This study introduces a new and uncomplicated method for producing PET foam, which differs from the commonly used extrusion foaming process that involves supercritical carbon dioxide or other media.

Melt Foamability of Poly(Ethylene Terephthalate)/Clay Nanocomposites Prepared by Extrusion Blending in the Presence of Pyromellitic Dianhydride

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Melt Foamability of Reactive Extrusion‐modified Poly(ethylene Terephthalate) with Pyromellitic Dianhydride Using Supercritical Carbon Dioxide As Blowing Agent

Improvement of Poly(ethylene Terephthalate) Melt-Foamability by Long-Chain Branching with the Combination of Pyromellitic Dianhydride and Triglycidyl Isocyanurate

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Morphology and mechanical properties of PET/PE blends compatibilized by nanoclays: Effect of thermal stability of nanofiller organic modifier

In-situ polymerization-modification process and foaming of poly(ethylene terephthalate)

Modification of Poly(ethylene Terephthalate) by Combination of Reactive Extrusion and Followed Solid‐state Polycondensation for Melt Foaming

Mutual Nucleating and Crystallization Behavior of Poly (ethylene Terephthalate)/polyamide 66 Blends

Rheology of Poly(lactic Acid)/poly(trimethylene Terephthalate) Blends Compatibilized by Clay or Maleic Anhydride-Grafted Poly(ethylene-Octene) Elastomer

Investigation on Foaming Ability of Modified Polyethylene Terephthalate (PET) Composites Prepared Using Compression Molding

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Preparation of Branched and Crosslinked Poly(ethylene terephthalate)and Its Foaming Behavior

Crystallization, Morphology, and Dynamic Mechanical Properties of Poly(trimethylene Terephthalate)/clay Nanocomposites

Preparation and Characterization of Polyethylene Terephthalate)/Boehmite Nanocomposites

Good Extrusion Foaming Performance of Long‐chain Branched PET Induced by Its Enhanced Crystallization Property

A Novel Polymeric Flame Retardant and Exfoliated Clay Nanocomposites: Preparation and Properties

Molten-state foaming performance of polyethylene terephthalates with supercritical fluids

Isothermal Crystallization and Subsequent Melting Behavior of Poly(Ethylene Terephthalate)/Silica Nanocomposites

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion