Abstract:Replaceable steel coupling beams (RSCB) have been proposed as an alternative to conventional reinforced concrete (RC) coupling beams for enhanced seismic resiliency of coupled wall systems. This paper presents a series of quasi-static tests conducted to examine the seismic behavior of RSCBs with RC slabs and to identify reasonable slab configurations that can minimize the damage to RC slabs. A total of five large-scale specimens were designed and tested. The first four specimens adopted the same end plate link-to-beam connection but adopted different types of RC slabs, including a composite slab, bearing slab, isolated slab or slotted slab. The fifth specimen adopted splice plate link-to-beam connection and a bearing slab. The test results indicate that all specimens developed a large inelastic rotation capacity of more than 0.05 rad with stable hysteretic response. The presence of RC slabs is found to have limited effect on the shear strength and inelastic rotation capacity of RSCBs. Some types of RC slabs increased the initial elastic stiffness of RSCBs, but in the plastic stage, none of the slabs affected the loading or unloading stiffness. Among those four types, of slabs, the composite slab suffered the most significant damage, as a result of pulling out of shear studs and subsequent pouching failure of the slab. Compared with the bearing slab or slotted slab, the isolated slab developed much fewer and smaller cracks, which should allow for easier repair. Based on the observations of this test and previous tests, four damage states for RSCBs were identified, corresponding to different repair methods. Fragility curves of RSCBs at various damage states were developed, which can provide the criteria for seismic performance assessment of RSCBs. (C) 2017 Elsevier Ltd. All rights reserved.

Cyclic Behavior of Replaceable Steel Coupling Beams

Experimental Study of Seismic Performance of Coupled Shear Wall Structure with Replaceable Coupling Beams

SEISMIC BEHAVIOR AND DESIGN OF REPLACEABLE STEEL COUPLING BEAMS

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Seismic performance of subassemblies with composite wall and replaceable steel coupling beam

Low-Cycle Fatigue Test of Circular Concrete Filled Tubular Columns

Experimental Study on Self-Centering Link Beams Using Post-Tensioned Steel-Sma Composite Tendons

Cyclic Behavior of Very Short Steel Shear Links

Seismic performance of the replaceable steel links with different short length ratios

Seismic Behavior and Fragility Curves of Replaceable Steel Coupling Beams with Slabs

Study of a new type of replaceable coupling beam in reinforced concrete shear wall structures

Concrete Filled Steel Plate Composite Coupling Beams: Experimental Study

Cyclic behavior of coupled steel plate shear walls with different beam-to-column connections

Study of earthquake-resilient coupled shear walls

Experimental study on seismic performance of two-segment replaceable link with channel splicing plate

Seismic performance and numerical analysis of steel plate-fiber reinforced concrete composite coupling beams

Cyclic behavior and analysis of steel plate reinforced concrete coupling beams with a span-to-depth ratio of 2.5

Experimental research on concrete filled steel plate composite coupling beams(I) : seismic behavior

Behavior of steel plate reinforced concrete coupling beams under reversed cyclic loading

Seismic Performance and Shear Strength of Coupling Beams Using Engineered Cementitious Composites with Different Reinforcement Layouts

Nonlinear Behavior of Deep Reinforced Concrete Coupling Beams