Abstract:Self-centering structures have been demonstrated to be an effective method by which to improve seismic resil-ience. Most related research is focused on the seismic performance of self-centering structures without initial damage, whereas the post-earthquake performance of structures, which is significant for their repair and operation, is less investigated. Based on this, this study aims to evaluate the post-earthquake behavior and explore the damage evolution of a novel self-centering shear wall with replaceable devices, including disc springs to apply restoring force and friction pads to dissipate energy. Cyclic loading tests were conducted on two intact self-centering shear walls to investigate their seismic performance in our previous studies, and limited damage was observed after the tests. Thus, in this study, cyclic loading was directly applied to the two damaged self-centering shear walls to obtain their post-earthquake performance. The results indicate that the damaged self-centering shear walls exhibited satisfactory seismic behavior; their bearing capacity was reduced at small drift ratios as compared to that of the intact specimens, whereas no decrease of their bearing capacity occurred even at a 3% drift ratio. Moreover, the damaged self-centering shear wall exhibited appreciable energy dissipation and self-centering capabilities, and the residual drift ratio was less than 0.5% at a 2.1% drift ratio. However, the damage at the bottom of the RC wall after the post-earthquake test was obvious, revealing that the novel self-centering RC shear wall would need to be repaired after several earthquakes. Therefore, two effective methods were further developed to improve the post-earthquake performance of the novel self-centering shear wall.

Study of earthquake-resilient coupled shear walls

Experimental Study of Seismic Performance of Coupled Shear Wall Structure with Replaceable Coupling Beams

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Study of a new type of replaceable coupling beam in reinforced concrete shear wall structures

Seismic performance of subassemblies with composite wall and replaceable steel coupling beam

Seismic Design and Application of Hybrid Coupled Walls with Replaceable Steel Coupling Beams in High‐rise Buildings

Numerical Study of Reinforced Concrete Coupled Shear Walls Based on a Two-Dimensional Finite Element Model

Cyclic Behavior of Replaceable Steel Coupling Beams

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Research advances of composite shear walls with double steel plates and filled concrete

Seismic performance evaluation of hybrid coupled shear wall system with shear and flexural fuse-type steel coupling beams

Post-earthquake Performance and Damage Evaluation of Self-Centering Shear Wall with Replaceable Devices

SEISMIC BEHAVIOR AND DESIGN OF REPLACEABLE STEEL COUPLING BEAMS

Seismic performances of the joint between replaceable-coupling beams and composite shear wall

Seismic Performance of Flexure-Dominated Reinforced-Engineered Cementitious Composites Coupled Shear Wall

Seismic Performance Evaluation of a High-Rise Building with Novel Hybrid Coupled Walls

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

Seismic behavior of hybrid coupled wall system with replaceable endplate-steel coupling beam

Development of prefabricated composite energy-dissipating slotted shear wall

Anti-Seismic Test Study on the Grid-Tube-Type Double Steel Plate and Infilled Concrete Composite Shear Wall