Abstract:Steel links are widely used as key energy dissipation components in steel eccentrically braced frames and hybrid coupled walls. This paper proposes a new displacement-based fiber beam-column element for simulating the seismic behavior of links with high efficiency, satisfactory accuracy, and sufficient convenience. All the three well-known important factors that affect the link overstrength are carefully and suitably considered in the model, including the complex hardening behavior of steel, the flange contribution, and the influence of axial restraint. Firstly, two-dimensional strain and stress fields and a Chaboche elasto-plastic material model incorporating both nonlinear kinematic and isotropic hardening are implemented for each fiber. Therefore, the model is based on the material response exhibiting improved convenience and applicability in contrast to existing concentrated plasticity models that require complex parameter calibration. Then, to account for the flange contribution to the link overstrength, simplified shear strain distributions of both webs and flanges are proposed on the basis of a detailed parametric study with solid finite-element models and data fitting procedures. In addition, the influence of axial restraint is properly reproduced, thus the model is able to predict the link overstrength accurately. To adequately verify the proposed model, a number of shell models with a wide range of parameters and test results from different research groups are both compared to the proposed fiber model. The quantitative effects of flange and axial restraint are also intensively studied. It is found that the flange and axial restraint effects can increase the capacity of shear links as much as 20 and 35% when the sectional flange-to-web area ratio of the link is larger than 3.0, respectively. The proposed model is proved to be a reliable and powerful tool for the seismic simulation of structures with steel links.

Cyclic Behavior of Very Short Steel Shear Links

Experimental Study on the Cyclic Behaviour of Shear Links Made of BLY160 Steel

Overstrength and Rotation Capacity of Short and Very Short Links Made of ASTM A992 Steel and Subjected to AISC 341-22 Loading Protocol

Experimental Research of Replaceable Q345GJ Steel Shear Links Considering Cyclic Buckling and Plastic Overstrength

Cyclic Behavior of Replaceable Steel Coupling Beams

Cyclic response and failure mode of mid-splice replaceable link constructed of LYP160 steel

Modeling Cyclic Behavior of Reinforcing Steel: Relevance in Seismic Response Analysis of Reinforced Concrete Structures

Experimental Investigations of Eccentrically Braced Frame(EBFs) with Replaceable Shear Links Subject to Cyclic Lateral Load

Seismic performance of the replaceable steel links with different short length ratios

Experimental Study on Seismic Behaviour of Eccentrically Braced Composite Frame with Vertical LYP Steel Shear Link

Experimental study on seismic performance of two-segment replaceable link with channel splicing plate

Development and Application of an Analytical Model for LYP Steel Shear Links in Eccentrically Braced Frames

Cyclic behavior of coupled steel plate shear walls with different beam-to-column connections

THE MECHANICAL PERFORMANCE OF SINGLE DIAGONAL LACING DOUBLE-WEB STAY MEMBERS OF OPEN CONCRETE FILLED STEEL TUBES WITH FOUR MAIN ELEMENTS

Cyclic Behavior of 460 MPa High Strength Structural Steel and Welded Connection under Earthquake Loading

Fiber Beam–Column Element Considering Flange Contribution for Steel Links under Cyclic Loads

Cyclic Behaviour of Deep Reinforced Concrete Coupling Beams

Cyclic behavior and analysis of steel plate reinforced concrete coupling beams with a span-to-depth ratio of 2.5

Parametric study of hysteretic performance of high-strength steel framed-tube structures with web-bolted connected shear links

Experimental study on cyclic behaviour of low yield point steel buckling-restrained braces

Experimental Research on Behavior of 460 MPa High Strength Steel I-section Columns under Cyclic Loading