Abstract:Steel plate shear wall is usually in the form of a tube as the lateral force-resisting component in high-rise buildings. In addition to the connection between the column flange and beam section, the connection between the column web and beam section (i.e. the weak-axis connection) is also required. Therefore, the hysteretic behavior of uncoupled and coupled steel plate shear walls with this connection form was studied. Cyclic loading tests were carried out on two 1/3 scaled four-story specimens consisting of the uncoupled and coupled steel plate shear wall specimens (S4RN and C4RN). The test results show that the weak-axis connected form makes the column avoid premature out-of-plane deformation; the coupled specimen has better performance than the uncoupled specimen with a higher ductility of 4.31, and both specimens tend to a similar angle of 45 in the direction of the tension band; the coupling beam can effectively enhance the bearing capacity, improve the pinch of the hysteresis loop, and its rotation exhibits a similar tendency to that inter-story rotation while hitting the max of 0.07rad. A numerical method to simulate the behavior of S4RN and C4RN, and the submodel solution strategy to investigate the improvement of infill plates, are proposed and implemented using the ABAQUS. The specimens' shear distribution and partially slotted infill plate configuration were examined after the numerical modeling method was validated against the test results. The numerical results show that approximately 60% of the total lateral force can be shared by the infill plates, and the coupling beams can further reduce the lateral force resisted by the infill plates. The coupling beams can effectively reduce the overturning moment of each wall pier and adjust the axial pressure between the inner and outer column. The partially slotted CSPSW exhibits a plump spindle-shaped hysteretic curve with a great ductility of 5.88, so the measurement for replacing ordinary infill plates with partially slotted infill plates has a good application prospect.

Cyclic behavior of coupled steel plate shear walls with different beam-to-column connections

Cyclic Tests and Performance of Weak-Axis Connected Uncoupled and Coupled Steel Plate Shear Wall with Novel Infill Plate Configuration

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Concrete Filled Steel Plate Composite Coupling Beams: Experimental Study

Experiment and Numerical Analysis of Multi-Story Coupled Steel Plate Shear Wall with Weak-Axis Connections

Cyclic behavior of high-strength concrete shear walls with high-strength reinforcements and boundary CFST columns

Experimental Research on Out-of-Plane Cyclic Behavior of Steel-Plate Composite Walls

Seismic Behavior and Strength Capacity of Steel Coupling Beam-to-src Wall Joints

Internal force and deformation of concrete-filled steel plate composite coupling beams

Behavior of Steel Plate Shear Wall Connected to Frame Beams Only

Cyclic Behavior of Steel Tube-Double Steel Plate-Concrete Composite Walls

Experimental Study on Steel Plate Shear Walls with CFT Columns

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Experimental study of precast concrete coupled walls

Cyclic Shear Behavior of Composite Walls with Encased Steel Braces

Experimental Study on Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls with Square CFST Concealed Columns

Experimental and Numerical Study of Unstiffened Steel Plate Shear Wall Structures

Seismic performance and numerical analysis of steel plate-fiber reinforced concrete composite coupling beams

Seismic behaviors of steel plate shear wall structures with construction details and materials

Behavior of steel plate reinforced concrete coupling beams under reversed cyclic loading