Modelling of current distribution in Nb3Sn multifilamentary strands subjected to bending
y miyoshi,changle zhou,e p a van lanen,m dhalle,a nijhuis
DOI: https://doi.org/10.1088/0953-2048/25/5/054003
2012-01-01
Abstract:In Nb3Sn cable-in-conduit conductors (CICCs), strands follow complex trajectories that result in a periodic bending strain acting on the strands upon electromagnetic loading and thermal contraction. Such a periodic bending strain leads to degradation of the overall transport performance of a CICC. Aiming for a better understanding and quantitative correlation between strand degradation and CICC test results, a detailed strand model is essential in combination with accurate intra-strand resistance data, the spatial filament strain distribution, and the associated filament crack distribution. Our novel numerical strand model is a 3D network of resistors including superconducting filaments, normal matrix elements, and an outer stabilizing shell or inner core. Along the strand length, matrix elements have Ohmic resistance, there is a filament-to-matrix contact resistance (R-fm) between filaments and matrix elements, while superconducting filaments have a power-law voltage-current (VI) characteristic with critical current (I-c) and an n-value described by the ITER Nb3Sn strain scaling law based on measured strand data. The model simulates the VI characteristic in a periodic bending experiment and provides the associated spatial potential distribution. The VI characteristics representing the low-and high-resistivity limits (LRL and HRL) are identified for periodic and uniform axial bending. The voltage level for the current transfer regime depends on the strand internal resistivities, i.e. the filament-to-matrix contact and the matrix resistivity, the twist pitch and the bending wavelength. The simulation results show good agreement against I-c degradation, as experimentally measured by the TARSIS facility, versus the assessed peak bending strain. In addition we discuss different methods for determining the applied peak bending strain. The model provides a basis to find a practical relationship between a strand's VI characteristic and the periodic bending strain, as well as a mapping of well-characterized strand performance to that of a full-size CICC.