Abstract:In Nb3Sn cable-in-conduit conductors (CICCs), strands follow complex trajectories that result in a periodic bending strain acting on the strands upon electromagnetic loading and thermal contraction. Such a periodic bending strain leads to degradation of the overall transport performance of a CICC. Aiming for a better understanding and quantitative correlation between strand degradation and CICC test results, a detailed strand model is essential in combination with accurate intra-strand resistance data, the spatial filament strain distribution, and the associated filament crack distribution. Our novel numerical strand model is a 3D network of resistors including superconducting filaments, normal matrix elements, and an outer stabilizing shell or inner core. Along the strand length, matrix elements have Ohmic resistance, there is a filament-to-matrix contact resistance (R-fm) between filaments and matrix elements, while superconducting filaments have a power-law voltage-current (VI) characteristic with critical current (I-c) and an n-value described by the ITER Nb3Sn strain scaling law based on measured strand data. The model simulates the VI characteristic in a periodic bending experiment and provides the associated spatial potential distribution. The VI characteristics representing the low-and high-resistivity limits (LRL and HRL) are identified for periodic and uniform axial bending. The voltage level for the current transfer regime depends on the strand internal resistivities, i.e. the filament-to-matrix contact and the matrix resistivity, the twist pitch and the bending wavelength. The simulation results show good agreement against I-c degradation, as experimentally measured by the TARSIS facility, versus the assessed peak bending strain. In addition we discuss different methods for determining the applied peak bending strain. The model provides a basis to find a practical relationship between a strand's VI characteristic and the periodic bending strain, as well as a mapping of well-characterized strand performance to that of a full-size CICC.

Fracture behavior of filament in Nb3Sn strands with crack-bridging model

Micromechanical simulation of fracture behavior of bimodal nanostructured metals

Numerical simulation of mechanical behaviors and intergranular fracture of polycrystalline Nb<sub>3</sub>Sn and superconducting filaments

Theoretical Modeling for the Effect of Twisting on the Properties of Multifilamentary $\hbox{nb}_{3}\hbox{sn}$ Superconducting Strand

Tensile Behavior Analysis of the Nb 3sn Superconducting Strand with Damage of the Filaments

Tensile Behavior Analysis Of The Nb3sn Superconducting Strand With Damage Of The Filaments

Electro-mechanical Behaviors of Composite Superconducting Strand with Filament Breakage

Strain Distributions in Superconducting Strands with Twisted Filaments

Simulation of Transport Properties in Nb3Sn Strand under Bending

A 3D Model on the Electromechanical Behavior of a Multifilament Twisted Nb 3 Sn Superconducting Strand

A Study of Relationship Between Dislocation Configuration of Nanocrack and Brittle-Ductile Mode of Fracture: Atomistic Modeling

Modeling fracture in nanomaterials via a virtual internal bond method

Fracture Behavior of Fibrous Network Materials: Crack Insensitivity and Toughening Mechanism

Initial damage influence of stiffness reduction for bronze route Nb3Sn strands

Length-scale-dependent Deformation and Fracture Behavior of Cu/X (x=nb, Zr) Multilayers: the Constraining Effects of the Ductile Phase on the Brittle Phase

Nanoscale ductile fracture and associated atomistic mechanisms in a body-centered cubic refractory metal

Fracture Nucleation in Single-Wall Carbon Nanotubes under Tension: A Continuum Analysis Incorporating Interatomic Potentials

Micromechanical modelling on the elastoplastic damage and irreversible critical current degradation of the twisted multi-filamentary Nb3Sn superconducting strand

A Molecular Dynamics Study of Nanofracture in Monolayer Boron Nitride

Fracture Behavior 91% Tungsten Alloys

Modelling of current distribution in Nb3Sn multifilamentary strands subjected to bending