Abstract:Al–Si alloys are particularly in demand for automotive and electronic applications, thanks to their excellent wear and thermal properties. Nevertheless, when processed by conventional methods with low cooling rates, the coarse primary Si phases are responsible for increasing brittleness and inducing crack propagation. This study shows that a faster cooling rate has a notable effect on refining the primary Si size. Herein, the effects of cooling rate on primary silicon (Si) phases in laser powder bed fusion (PBF‐LB/M) processed hypereutectic Al–Si alloy are investigated. These alloys are particularly in demand for automotive and electronic applications, thanks to their excellent wear and thermal properties. Nevertheless, when processed by conventional methods like casting with comparatively lower cooling rates, the coarse primary Si phases are responsible for increasing brittleness and inducing crack propagation. The refinement of the primary silicon phases is aimed to be achieved through the PBF‐LB/M process, which offers a high cooling rate. The primary Si phases are observed under three different thermal substrate plate conditions—untempered, with cooling and heating, and additionally with varying volume energy density. Furthermore, the impact of primary Si size on the hardness of the fabricated samples is evaluated. The findings show that a faster cooling rate has a notable effect on refining the primary Si size. Then, hardness is directly affected by the primary Si size, with larger Si resulting in decreased hardness.

Microstructure and Thermal Conductivity of Hypereutectic Al-High Si Produced by Casting and Spray Deposition

Achieving High Thermal Conductivity of Al–50Si Alloy Through Heat Treatment and Its Microstructural Evolution

Study on the Effect of Pre-Refinement and Heat Treatment on the Microstructure and Properties of Hypoeutectic Al-Si-Mg Alloy

The Effect of Heat Treatments on the Microstructural Evolution of Twin-Roll-Cast Al-Fe-Si Alloys

Microstructure and Properties of Semi-solid Die Casting of High Silicon Aluminum Alloy with High Thermal Conductivity

New Approach to Achieve Extremely High Thermal Conductivity of a Powder Extruded Al–50Si Alloy

Microstructure and thermal expansion behavior of spray-deposited Al-50Si

Microstructure and Performance of Al-Si Alloy with High Si Content by High Temperature Diffusion Treatment

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion

Effect of Modification with Different Contents of Sb and Sr on the Thermal Conductivity of Hypoeutectic Al-Si Alloy

Effect of Thermal Exposure on Microstructure and Mechanical Properties of Al−Si−Cu−Ni−Mg Alloy Produced by Different Casting Technologies

Evolution of Microstructure and Mechanical Properties of As-Cast Al-50si Alloy Due to Heat Treatment and P Modifier Content

Microstructure and Tribological Property Correlations of Die Cast and Spray Formed Al-30 wt.% Si Alloy

Effect of Cooling Rate on the Microstructure Evolution and Mechanical Properties of Iron-Rich Al–Si Alloy

Fabrication of fine grain SiAl alloy and its uniform thermal conductivity

Effect of extrusion temperatures on the microstructures, mechanical properties and thermal properties of PM Al-20Si alloy

The evolution on the microstructure and thermal expansion behavior of Al–50Si alloy with different P contents

Investigation of the influences of heat treatment on the microstructures and thermal properties of Al-20Si alloy fabricated by powder extrusion

Influence of Thermal Rate Treatment and Low Temperature Pouring on Microstructure and Tensile Properties of AlSi7Mg Alloy

Microstructure Evolution of Primary Si Phase in Hypereutectic Al-20Si Alloys Prepared by Centrifugal Casting under an Electromagnetic Field

Fabrication of hypereutectic Al Si alloy with improved mechanical and thermal properties by hot extrusion