Abstract:To further the anti-ablation property of carbon/carbon composites (C/Cs) at extreme-high temperature, Cr-ZrC coating is fabricated on SiC-coated C/Cs. The anti-ablation properties of the ZrC coatings modified by various content of Cr are tested by oxyacetylene flame (heat flux: 2.4 MW/m(2)). Compared with pure ZrC coating, the ablation resistance property of the sprayed Cr-ZrC coating indicates an effective improvement. Cr acts as an accelerant by facilitating the liquid ZrO2 sintering and form a close structure. This dense structure can alleviate oxygen penetration. As the content of Cr increase (10 wt%, 15 wt% and 20 wt%), after cooling can also detect the retaining of tetragonal-ZrO2 (t-ZrO2). The phase transformation from t-ZrO2 to monoclinic ZrO2 (m-ZrO2) can lead to the volume expansion. The retaining of t-ZrO2 shows the phase transformation is impeded, which contributes to the thermal stability of the Cr modified ZrC coating. In the specimen, oxygen mainly diffuse through micropores, microcracks and grain boundaries. For Cr-ZrC coating, these diffuse ways could be partly or completely sealed by melted Zr-O-Cr coating during ablation test, which can effectively protect C/Cs during the oxyacetylene ablation test. When the content of Cr is 15 wt%, on the surface can form dense dendritic structure, which can effectively protect C/Cs from ablation.

Effect of the Surface Microstructure of Sic Inner Coating on the Bonding Strength and Ablation Resistance of Zrb2-Sic Coating for C/C Composites

Surface Optimization of ZrC–SiC Inner Layer to Enhance Ablation Property of SiC/ZrC–SiC Multi-Layer Coating for C/C Composites

Effect of Si, Al2O3 additives on the ablation behavior of ZrB2-SiC coating with Al2O3-modified SiC bond coat for C/C composites

A ZrCSiC/SiC multilayer anti-ablation coating for ZrC modified C/C composites

Effect of Free Silicon Content in Inner SiC-Si Coating on Thermal Cyclic Ablation Behaviour and Microstructure of ZrC/SiC-Si Coating

Bonding Strength, Thermal Shock and Oxidation Resistance of Interlocking (Zr,hf)c-Sic/sic Double-Layer Coating for C/C Composites

Study on the Ablation Resistance of ZrB2-SiC-LaSi2 Coating Prepared on the C/C Composites

Microstructures and Ablation Resistance of Zrc Coating for Sic-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying

Microstructure, surface stress and surface temperature response of ZrB2–SiC based coatings

Effect of CrSi2 on the Ablation Resistance of a ZrSi2-Y2O3/SiC Coating Prepared by SAPS

Ablation Mechanism and Properties of ZrB2-ZrC-SiC Coating with Micro-Submicron Reinforced Structure

Investigation on Ablation Characteristics of C/C Composites with ZrC/SiC Coating

Effect of CVD ZrB2 Coating Thickness on Anti-Ablation Performance of C/SiC Composites

Anti-ablation Performance of Plasma Sprayed ZrB2/SiC Coatings on C/C Substrates and the Influence of a Chemical Vapor Deposited SiC Interlayer

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying

Microstructure and High Temperature Anti-Ablation Behavior of Cr-modified ZrC Coating for SiC-coated Carbon/carbon Composites

Ablation Resistance of ZrB2–SiC Coating Prepared by Supersonic Atmosphere Plasma Spraying for SiC-coated Carbon/carbon Composites

Microstructures and Ablative Properties of ZrC Coating by Chemical Vapor Deposition

Effect of pre-oxidation treatment on the bonding strength and thermal shock resistance of SiC coating for C/C–ZrC–SiC composites

Microstructure and Properties of ZrC-SiC Multi-Phase Coatings Prepared by Thermal Evaporation Deposition and an In-Situ Reaction Method

Anti-ablation performance of plasma sprayed ZrB 2 /SiC coatings on C/C substrates and the influence of a chemical vapor deposited SiC interlayer