Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

Multi-Level Speed Planning Based Capturing Strategy Of Simultaneous Three-Fingered End-Effectors

A Cross Complementarity Method for Simultaneous End-Effector Selection and Grasp Planning

Efficient Object Manipulation to an Arbitrary Goal Pose: Learning-based Anytime Prioritized Planning

Capturing dynamics of a space manipulator end-effector with snare capture and retract operations

PD-Impedance Combined Control Strategy for Capture Operations Using a 3-DOF Space Manipulator with a Compliant End-Effector

Capture Phase Dynamic Model for a Space Grappling Device with Flexible Capture Mechanism

Enveloping Grasp Planning of a Three-Fingered Deployable Metamorphic Robotic Grasper.

Design And Experiment Of A Universal Space-Saving End-Effector For Multi-Task Operations

Development of an Integrated Grapple Chain for a Simultaneous Three-Fingered End-Effector.

Research on Two-Stage Grasping Planning Method for Multifingered Dexterous Hand

Research on Grasping Planning for Apple Picking Robot’s End-Effector

A new strategy for capturing a noncooperative spacecraft by a robotic arm

Capture Strategy and Control of Non-cooperative Target Using Space Manipulator with Magnetic Capture Device

Reinforcement Learning-Based Pose Coordination Planning Capture Strategy for Space Non-Cooperative Targets

Reach-to-Grasp Planning for a Synergy-Controlled Robotic Hand Based on Grasp Quality Prediction

Fuzzy-based Grasp-Force-adaptive Control for Three-Fingered Space Robot End-Effector

A space-saving end-effector with capture and actuation transmission capabilities

A Grasp Strategy with Flexible Contacting for Multi-fingered Hand Rehabilitation Exoskeleton

Development of Space End-Effector with Capabilities of Misalignment Tolerance and Soft Capture Based on Tendon-Sheath Transmission System

Configuration Design of an Under-Actuated Robotic Hand Based on Maximum Grasping Space

A Multitentacle Gripper for Dynamic Capture