Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

Capture Strategy and Control of Non-cooperative Target Using Space Manipulator with Magnetic Capture Device

Dynamics and Control of Noncooperative Space Target Capture Using a Flexible Manipulator

Control of a Space Manipulator Capturing a Rotating Object in the Three-dimensional Space.

Capture Of Non-Cooperative Target Using 7-Dof Manipulator

PD-Impedance Combined Control Strategy for Capture Operations Using a 3-DOF Space Manipulator with a Compliant End-Effector

A strategy to decelerate and capture a spinning object by a dual-arm space robot

Stabilization Control for Spacecraft-manipulator System After Capturing Tumbling Target

Predictive motion control for autonomous capture of a tumbling target with a space manipulator

A new strategy for capturing a noncooperative spacecraft by a robotic arm

Capturing a Space Target Using a Flexible Space Robot

Capturing dynamics of a space manipulator end-effector with snare capture and retract operations

Dynamics and Control of a 7-DOF Hybrid Manipulator for Capturing a Non-Cooperative Target in Space

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

Contact Control for Grasping a Non-Cooperative Satellite by a Space Robot

Motion Analysis of Robotic Arm Capture Mechanism for Space Tumbling Target Capture

Dynamic Closest Point Identification and Estimation for Tumbling Target Capturing.

Autonomous Capturing of Moving Target with Optimal Rendezvous Attitude and Manipulator Configuration.

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

A novel strategy for a 7-DOF space manipulator transferring a captured target with collision avoidance

Robust control of a dual-arm space robot to capture a non-cooperative target in 3D space

Adaptive Reaction Null-Space Control of Dual-Arm Space Robot for Post-Capture of Non-Cooperative Target