Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

A strategy to decelerate and capture a spinning object by a dual-arm space robot

Robust control of a dual-arm space robot to capture a non-cooperative target in 3D space

A new strategy for capturing a noncooperative spacecraft by a robotic arm

Direction and Trajectory Tracking Control for Nonholonomic Spherical Robot by Combining Sliding Mode Controller and Model Prediction Controller

Control of a Space Manipulator Capturing a Rotating Object in the Three-dimensional Space.

Stabilization Control for Spacecraft-manipulator System After Capturing Tumbling Target

Seamless Capture and Stabilization of Spinning Satellites By Space Robots with Spinning Base

Coordinated Stabilization for Space Robot after Capturing a Noncooperative Target with Large Inertia

Robust coordinated control of a dual-arm space robot

Adaptive Reaction Null-Space Control of Dual-Arm Space Robot for Post-Capture of Non-Cooperative Target

Coordinated Motion Control of A Dual-Arm Space Robot with Joint-Limit Avoidance and Uncertain Inertial Parameters

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

Coordinated control of dual-arm robot on space structure for capturing space targets

Adaptive Coordinated Motion Control With Variable Forgetting Factor For A Dual-Arm Space Robot In Post-Capture Of A Noncooperative Target

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Autonomous Path Planning and Experiment Study of Free-Floating Space Robot for Spinning Satellite Capturing

Area-oriented Coordinated Trajectory Planning of Dual-Arm Space Robot for Capturing a Tumbling Target

Flexible online planning based residual space object de-spinning for dual-arm space-borne maintenance

Impedance-Sliding Mode Control With Force Constraints for Space Robots Capturing Non-Cooperative Objects

Hybrid Control Scheme for Grasping a Non-Cooperative Tumbling Satellite

Adaptive detumbling control of dual-arm space robot after capturing non-cooperative target