Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

A capture method based on series-parallel manipulator for satellite on-orbit service

A Solution Using Only Electromagnetic Coils for Relative Pose Control in Satellite Docking

Target Berthing and Base Reorientation of Free-Floating Space Robotic System after Capturing

Seamless Capture and Stabilization of Spinning Satellites By Space Robots with Spinning Base

Coordination Control of Free-Flyer Manipulators

Control of a Space Manipulator Capturing a Rotating Object in the Three-dimensional Space.

Two-phase visual servoing for capturing tumbling non-cooperative satellites with a space manipulator

On the autonomous target capturing of flexible-base space robotic system

Tracking Trajectory Planning of Space Manipulator for Capturing Uncontrolled Spinning Satellite

Autonomous Path Planning and Experiment Study of Free-Floating Space Robot for Spinning Satellite Capturing

Capturing dynamics of a space manipulator end-effector with snare capture and retract operations

Design of a non-cooperative target capture mechanism for capturing satellite launch adapter ring

A new strategy for capturing a noncooperative spacecraft by a robotic arm

Robust control of a dual-arm space robot to capture a non-cooperative target in 3D space

Predictive motion control for autonomous capture of a tumbling target with a space manipulator

A strategy to decelerate and capture a spinning object by a dual-arm space robot

Autonomous Capturing of Moving Target with Optimal Rendezvous Attitude and Manipulator Configuration.

Hybrid Control Scheme for Grasping a Non-Cooperative Tumbling Satellite

Trajectory Planning of Space Robot System for Target Berthing and Reorientation after Capturing

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

Force-position collaborative optimization of rope-driven snake manipulator for capturing non-cooperative space targets