Abstract:The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit. Currently, there are few researches about the end-effector, and the existing end-effectors have some disadvantages, such as poor misalignment tolerance capability and complex mechanical components. According to the end positioning errors and the residual vibration characters of the large space manipulators, two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed. And the end-effector should accommodate the following misalignments of the mechanical interface. The translation misalignments in axial and radial directions and the angular misalignments in roll, pitch and yaw are ±100 mm, 100 mm, ±10o, ±15o, ±15o, respectively. Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily. The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes, and they are designed in detail. The capabilities of misalignment tolerance and soft capture are validated and evaluated, through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software. The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement. And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll, pitch and yaw of the steel cable-snared end-effector are 30mm, 15mm, 6o, 3o and 3o larger than those of the three fingers-three petals end-effector, respectively. And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector. The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.

A space-saving end-effector with capture and actuation transmission capabilities

Design And Experiment Of A Universal Space-Saving End-Effector For Multi-Task Operations

Development of Space End-Effector with Capabilities of Misalignment Tolerance and Soft Capture Based on Tendon-Sheath Transmission System

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

A Novel Flexure-Based 3-DOF Micro-Parallel Manipulator with a Gripper for Micro/nano Manipulation

Design Schemes and Comparison Research of the End-Effector of Large Space Manipulator

A review of the end-effector of large space manipulator with capabilities of misalignment tolerance and soft capture

Development of Chinese Large-Scale Space End-Effector

Transfer vehicle cargo manipulating strategy in orbit using large-scale space end-effector

Design Of An End-Effector For Spacecraft Automatic Assembly Robot

Capturing dynamics of a space manipulator end-effector with snare capture and retract operations

Capture Phase Dynamic Model for a Space Grappling Device with Flexible Capture Mechanism

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Space End Effector Cpaturing Hybrid Simulation System

Design and workspace analysis of a cable-driven space capture robot for noncooperative targets

A novel end-effector for lunar sample acquisition and return

Modeling and Capture Dynamics of Flexible Cables Used in Large-scale Space End-effector

Design of a large stroke compliant gripping mechanism for constant-force applications

Design and Optimization of Electromagnetically Driven End-Effector

Multi-Level Speed Planning Based Capturing Strategy Of Simultaneous Three-Fingered End-Effectors

A low-cost underactuated compliant gripper with multifunctional jaws for precision manipulation