Abstract:The development of robotic hand that can imitate human movements has always been an important research topic. In this paper, a linkage-driven underactuated three-finger hand is proposed to imitate the flexion/extension (f/e) and abduction/adduction (a/a) motions of human hand. The robotic hand has three identical underactuated fingers, each of which contains an underactuated planar linkage, a spherical four-bar mechanism, and a set of bevel gears. The spherical four-bar mechanism is designed to provide 2-degree-of-freedom actuation, driving the f/e and a/a motions of the proximal joint simultaneously. Based on screw theory, the kinematic model of the spherical mechanism is established, and the maximum available workspace index (MAW) of the spherical mechanism is proposed to evaluate the workspace with the same adduction and abduction angle ranges. The effects of the parameters of the spherical mechanism on the MAW and the transmission efficiency are obtained, and the parameters of the spherical mechanism are optimized. The optimization results show that the MAW of the spherical mechanism can be increased by up to 3.5 times. Finally, experiments are carried out to show the proposed robotic hand can perform simultaneous adaptive grasping and in-hand manipulation. Note to Practitioners—The robotic hand is of great significance for replacing workers in heavy, repetitive, and unsafe working environments. Uncertain environments in non-manufacturing fields, such as industries for pick-and-place, sorting, palletizing, assembly and other operations, marine development, and medical service, require that robotic hands can operate tasks like human hands. Inspired by the human hand with the f/e and a/a motions, a linkage-driven underactuated three-finger hand is proposed in this paper to imitate the functions of the human hand. Due to its underactuated characteristics and a/a function, the designed robotic hand is more dexterous and economical. The effects of the design parameters of the spherical mechanism on the MAW and the transmission efficiency are analyzed, and the parameters of the spherical mechanism are optimized to improve the performance of the robotic hand. This approach can be used in other industrial applications related to the robotic hand or the spherical mechanism.

Development of an Integrated Grapple Chain for a Simultaneous Three-Fingered End-Effector.

A Bioinspired Gripper with Sequential Motion and Mutable Posture Enabled by Antagonistic Mechanism

Design of Humanoid Robotic Hand Based on Link Underactuation

Design of a Highly Integrated Underactuated Finger Towards Prosthetic Hand.

A Parallel And Active Hybrid Grasping Robot Finger With A Single Chain Transmission Mechanism

Design and Analysis of a Three-Fingered Deployable Metamorphic Robotic Grasper

Development of Multi-Fingered Dexterous Hand for Grasping Manipulation

Multi-Mode Compound Grasping Robot Finger Driven by Linkage

Under-actuated Humanoid Robot Hand with End Power Grasping

Configuration Design of an Under-Actuated Robotic Hand Based on Maximum Grasping Space

Linkage Under-Actuated Humanoid Robotic Hand with Control of Grasping Force

Passive Adaptive Grasp Multi-Fingered Humanoid Robot Hand with High Under-Actuated Function

Development of a Multi-DOF Anthropomorphic Prosthetic Hand

A Robot Gripper with Differential and Hoecken Linkages for Straight Parallel Pinch and Self-Adaptive Grasp

Development of the CA Robot Finger with a Novel Coupled and Active Grasping Mode.

Design and Development of a Composite Compliant Two-finger Gripper.

An Underactuated Robot Finger with Movable Skeleton Link and Hoeckens Mechanism for Linear Clamping and Self-adaptive Grasping.

A Single-Actuator Four-Finger Adaptive Gripper for Robotic Assembly

Design, drive and control of a novel SMA-actuated humanoid flexible gripper

Design of 4-DOF hybrid parallel robots with an integrated three-fingered robot end effector

A Linkage-Driven Underactuated Robotic Hand for Adaptive Grasping and In-Hand Manipulation