Abstract:New time-based readout (TBR) electronics has been developed and evaluated for its performance and application for PET detectors. It consists of a leading edge (LE) timing threshold for timing pickoff that provides a signal timing t1; a charge integration followed by a constant discharge between two specific timings t2 and t3 that are used to directly measure the signal energy. The timing-walk error caused by LE from signals of different amplitudes can be measured with t1 as a function of different signal amplitudes that is proportional to the time difference between t2 and t3. With this pre-calibration, timing-walk error can be accurately corrected. Therefore, both signal timing and energy can be accurately measured with digital timing signals without using CFD and ADC. These timing signals were controlled and in principle can be measured by an FPGA that can apply many signal logic and data correction algorithms. A single channel discrete component TBR circuit has been implemented in PC board, and 8-channel ASIC chips have been developed for feasibility evaluations and PET detector applications. Initial functionality and performance evaluations have been conducted. Signal amplitude measurement accuracy and linearity are very good; the measured timing accuracy from a pulse is the same as a standard CFD and reaches to similar to 100 ps resolution with the test setup. Both suitable energy and coincidence timing resolutions (similar to 17% and similar to 1.0-2.0 ns) were achieved with PMT or Solid-State PM (SSPM) array based PET detectors. Initial studies to acquire flood source crystal identification map has demonstrated the advantages of applying parallel readout with TBR electronics that read out and process signals from each pixel of SSPM array independently. With its relatively simple circuit and low cost, TBR electronics is expected to provide suitable front-end signal readout electronics for compact photon detectors such as SSPM array that require large number of output channels and demand high performance in energy and timing.

Preliminary Performance of a Continuous Crystal PET Detector with TODT Readout Scheme

An FPGA-based 64-channel DAQ system using linear time-over-threshold scheme for a continuous crystal PET detector

A Linear Time-Over-Threshold Digitizing Scheme and Its 64-Channel Daq Prototype Design on Fpga for A Continuous Crystal Pet Detector

Effect of Crystal surface treatment on the timing response of a DOI detector for PET

Optimization Of Crystal Surface Treatment For A Double Layer Depth Of Interaction Detector

Evaluation of monolithic crystal detector with dual-ended readout utilizing multiplexing method

Energy And Timing Measurement Of A Pet Detector With Time-Based Readout Electronics

Development of a Compact DOI–TOF Detector Module for High-Performance PET Systems

Tof Pet Detectors Employing Stripline Based Readout and Mvt Digitizer

An Analog Front-end ASIC Design for 16-Channel SiPM Readout in PET Detectors

Optimization of Dual Mode Readout of Sensl SiPM for TOF PET Detectors

Photon Interaction Position-Dependent Time Walk Measurement for the PET Detectors with a Ontinuous Crystal Coupled to a Multi-Anode PMT

Crystal surface and reflector optimization for the SiPM-based dual-ended readout TOF-DOI PET detector

Energy and Timing Measurement with Time-Based Detector Readout for PET Applications: Principle and Validation with Discrete Circuit Components.

Front-End Electronics Design Based on Vernier Method for A High Resolution Micropet

A Semi-Monolithic Detector providing intrinsic DOI-encoding and sub-200 ps CRT TOF-Capabilities for Clinical PET Applications

Initial Implementation of All-Digital PET DAQ System

High Resolution TOF-PET Detectors by Using Dual-Ended Readout with SiPM Arrays of Different Pixel Sizes on Each End

Coincidence time resolution of 50 ps FWHM using a pair of multi-anode MCP-PMTs with Cherenkov radiator window

Development of a High Performance Digital Silicon Photomultiplier (dSiPM) for ToF PET Imaging

TOF and DOI Capable SiPM-PET Detector Using Striplines That Provide Row and Column Based Measurements