Abstract:603 Objectives Digital Silicon Photomultiplier has recently emerged as a promising photodetector for ToF PET systems. It not only addresses a number of challenges encountered by analog SiPM such as power consumption and noise susceptibility, but also provides additional benefits including low cost and possibility to monolithically integrate the single-photon avalanche photodiode (SPAD) on the same substrate with complex circuitry[1-4]. In this study, a high-resolution, ultra-low power time-to-digital converter (TDC) was implemented to push the limit of timing resolution and improve image quality[5]. Methods Our SPAD array is fabricated in 130nm CMOS technology, using an n+/p-well junction[6]. A guard ring structure is formed to suppress the premature edge breakdown[7]. An improved passive-quenching, active-reset front-end circuit is coupled to each SPAD cell to disable noisy cells. Fig.1(a) shows the layout of our 8x8 SPAD array. Our TDC employs the Vernier Gated Ring Oscillator to improve the time resolution and reduces power consumption by a gated-mode operation. Fig.1(b) gives the TDC layout. Results The prototype chip is fabricated in standard 130nm CMOS, achieving 7.3ps resolution, 11ps precision, 1.2mW power consumption and 0.03mm2 area. A rms integral nonlinearity(INL) of 1.2LSB is obtained with the help of INL look-up-table calibration. Table I compares the performance with recent relevent works. Conclusions The design and characterization of a dSiPM prototype fabricated in a 130 nm standard CMOS is reported. It comprises of an 8x8 SPAD array and a high-resolution TDC, whose compact size makes it suitable for an array configuration. For the future work, the SPAD array and TDC will be coupled to scintillation crystals to evaluate energy resolution and time resolution for ToF PET imaging. Research Support The authors gratefully acknowledge support from the Canada Research Chair program, NSERC of Canada, CFI, FedDev Ontario, NSERC ResEau strategic network, NCE IC-IMPACTS and CMC Microsystems.

Optimization of Dual Mode Readout of Sensl SiPM for TOF PET Detectors

Development Of Multi-Channel Fast Sipm Readout Electronics For Clinical Tof Pet Detector

DOI- and TOF-capable PET Array Detector Using Double-Ended Light Readout and Stripline-Based Row and Column Electronic Readout

A Novel Sub-Millimeter Resolution Pet Detector with Tof Capability

Development of a Compact DOI–TOF Detector Module for High-Performance PET Systems

TOF and DOI Capable SiPM-PET Detector Using Striplines That Provide Row and Column Based Measurements

Improving the timing resolution of a time-of-flight and depth-of-interaction PET array detector

High Resolution TOF-PET Detectors by Using Dual-Ended Readout with SiPM Arrays of Different Pixel Sizes on Each End

Design and Performance Optimization of SiPM Array Multiplexing Readout Circuit

Study on Timing Performance of a Readout Circuit for SiPM

Crystal surface and reflector optimization for the SiPM-based dual-ended readout TOF-DOI PET detector

Low power implementation of high frequency SiPM readout for Cherenkov and scintillation detectors in TOF-PET

A Novel TOF-PET Detector Based on SiPM and Cherenkov Radiation

DIET: a multi-channel SiPM readout ASIC for TOF-PET with individual energy and timing digitizer

Tof Pet Detectors Employing Stripline Based Readout and Mvt Digitizer

Multiplexing Readout for Time-of-Flight (TOF) PET Detectors Using Striplines

Scalable electronic readout design for a 100 ps coincidence time resolution TOF-PET system

Development of a Multi-Channel ASIC with Individual Energy and Timing Digitization for SiPM Detectors for TOF-PET Applications

Development of a High Performance Digital Silicon Photomultiplier (dSiPM) for ToF PET Imaging

Development of a MR-compatible DOI-TOF detector module for PET imaging systems

Design and Evaluation of LYSO/SiPM LIGHTENING PET Detector with DTI Sampling Method