Abstract:A sapphire derived fiber (SDF) based Fabry-Perot interferometer (FPI) with an etched micro air cavity for strain measurement at high temperatures is proposed. The FPI is formed by splicing a section of SDF between an etched single mode fiber (ESMF) and a capillary. The SDF's core containing 51.3mol.% aluminum provides the intrinsic Fabry-Perot interferometer cavity with an enhanced fringe contrast through the narrow etched air cavity reflector. Because the different Poisson effects of the cladding and the core have different deformations under axial stress, the transverse strain imposed from the cladding to the core was introduced to the additive model. The strain sensitivity of the FPI was theoretically analyzed and experimentally demonstrated at room temperature. A thermal annealing process was performed to study the stability in high temperatures and to release the residual stress during the sensor's fabrication. The strain calibration was carried out subsequently from 20 degrees C to 1000 degrees C. Benefiting from the doping in the core and diffusion in the cladding of the high temperature resistant material Al2O3, the proposed sensor was proved to operate well in 950 degrees C and was also characteristized by a sensitivity of 1.19 pm/mu epsilon, and 1.06 pm/mu epsilon in the process of loading and unloading strain separately. (C) 2019 Optical Society of America under the terms of the OSA Open Access Publishing

Strain Measurement at High Temperature Environment Based on Fabry-Perot Interferometer Cascaded Fiber Regeneration Grating

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Strain and High-Temperature Discrimination Using A Type Ii Fiber Bragg Grating and A Miniature Fiber Fabry-Perot Interferometer

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Cascaded FPI/LPFG Interferometer for High-Precision Simultaneous Measurement of Strain and Temperature

High-sensitivity Interferometric High-Temperature Strain Sensor Based on Optical Harmonic Vernier Effect

Combined Regenerated Fibre Bragg Gratings and Fabry-Perot Etalons for Dual Strain and Temperature Sensing

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

Strain and Temperature Discrimination by Using Temperature-Independent FPI and FBG

High Temperature and Strain Dual-Parameters Fiber Sensing Based on Intermodal Interference and Femtosecond Laser Fabricated Fiber Bragg Grating

Temperature compensation high strain measure ment based on a Fabry-Perot interferometer with the virtual-assisted Vernier effect

Strain Measurement at Temperatures Up to 800°C Using Regenerated Gratings Produced in the Highge-Doped and B/Ge Co-Doped Fibers.

FBG-EFPI Sensor for Large Strain Measurement with Low Temperature Crosstalk

Sapphire derived fiber based Fabry-Perot interferometer with an etched micro air cavity for strain measurement at high temperatures.

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor