Abstract:A sapphire-derived fiber (SDF)-air based composite Fabry–Perot interferometer (FPI) for simultaneous measurement of strain and temperature has been proposed and demonstrated. The FPI was fabricated by cascading a lead-in single mode fiber and a short section of SDF with a small air cavity left in between. The structure was inserted into capillaries and fixed by an arc fusion. The air cavity was used for strain sensing. Its strain sensitivity was improved by increasing the ratio of capillary based active length to air based interference cavity length, while its temperature sensitivity was compensated by the SDF with a well-designed length and alumina content. The SDF cavity served as a thermometer. The reflection spectrum was demodulated by tracing the wavelength shifts of the low- and high-frequency fringes, which were caused by the air-cavity and the combination of the air and SDF based cavities, respectively. A dual-parameter sensitivity matrix was introduced to realize the simultaneous measurement of strain and temperature. In the experiments, an enhanced strain sensitivity of 55.52 pm/με in the range of 0-500με and a reduced temperature sensitivity of 0.05pm/°C in the range of (20-600)°C were obtained from the lowfrequency fringe, while a strain sensitivity of 5.38 pm/με and a temperature sensitivity of 10.81 pm/°C were obtained from the high-frequency fringe.

A Composite Fabry-Perot Interferometric Sensor with the Dual-Cavity Structure for Simultaneous Measurement of High Temperature and Strain

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

Pcf-Based Fabry-Perot Interferometric Sensor For Strain Measurement Under High-Temperature

Simultaneous Measurement of Temperature and Strain Based on All-Fiber Fabry-Perot Sensor

Simultaneous Strain and Temperature Measurement Using an Integrated Fibre Bragg Grating Extrinsic Fabry-Perot Sensor

Cascaded-cavity Fabry–Perot Interferometer for Simultaneous Measurement of Temperature and Strain with Cross-Sensitivity Compensation

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Simultaneous Measurement of High Temperature and Strain Based on Miniature Tip-Packaged Dual-Fpis

A Fabry-Perot Interferometer for Simultaneous Measuring Temperature and Strain Based on Sapphire-Derived Fiber-Air

Compact Tri-FFPI Sensor for Measurement of Ultrahigh Temperature, Vibration Acceleration, and Strain

High Temperature Strain Sensor Based on In-Line Fabry-Perot Interferometer Formed by Hollow-Core Photonic Crystal Fiber

Hybrid Lpfg/Mefpi Sensor for Simultaneous Measurement of High-Temperature and Strain

Composite Cavity Fiber Tip Fabry-Perot Interferometer for High Temperature Sensing

A Dual-Cavity Fabry–Perot Interferometric Fiber-Optic Sensor for the Simultaneous Measurement of High-Temperature and High-Gas-Pressure

PCF-based Fabry-Pérot interferometric sensor for strain measurement at high temperatures

Simultaneous Measurement of Strain and Temperature Using Fabry–Pérot Interferometry and Antiresonant Mechanism in a Hollow-Core Fiber

Fiber-Optic Hybrid-Structured Fabry–Perot Interferometer Based on Large Lateral Offset Splicing for Simultaneous Measurement of Strain and Temperature

An IFPI Temperature Sensor Fabricated in an Unstriped Optical Fiber with Self-Strain-Compensation Function.

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain