Abstract:We propose a new technique to fabricate a highly specialized optical element, a hybrid planar Grating/Fresnel lens (G-Fresnel), which is particularly useful to improve or enable more-affordable miniature/portable spectrometers. Both the Fresnel and the grating surface are fabricated simultaneously by sandwiching soft PDMS between a hard grating and a pre-replicated negative Fresnel surface. Several adhesion reduction techniques are also investigated that help improve both fabrication and cost efficiency (by reducing the solidification time) as well as the lifetime of the mold. Alignment errors are systematically analyzed, and their effects on the G-Fresnel lens evaluated. A compact fabrication platform was built, which is smaller than a volume of 160 x 140 x 106 mm(3) to fit into a conventional vacuum drying oven, for the fabrication of a G-Fresnel lens with a diameter of 25.4 mm, an equivalent focal length of 25 mm, and a blazed grating pattern with 600 lines/mm spacing. The solidification time was reduced to 2 hours thanks to the improved adhesion reduction technique that permits a PDMS drying-temperature as high as 65 degrees C. The fabricated G-Fresnel lens was evaluated with regard to both geometrical fabrication precision and optical performance. The measured results, using a step gauge and atomic force microscopy, confirm that this replication technique produces high-quality replicates of the master surface-profile. Furthermore, a prototype spectrometer that uses a G-Fresnel lens was built and evaluated. The spectrometer fits within a volume of about 100 mm x 50 mm x 30 mm, and it operates across a wide wavelength spectrum (450 nm to 650 nm). Both the calculation based on the optical software ZEMAX and the experimental measurements are consistent and confirm that the spectrometer with the G-Fresnel lens can provide a spectral resolution of better than 1.2 nm. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Fabrication of Large-Aperture, High Efficiency, Fresnel Diffractive Membrane Optic for Space Telescope

Design of Large-Deflection-angle High-Diffraction-efficiency High-Dispersion Hybrid Gratings

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

A New Way Of Fabricating Spectacle Lens Using Binary Diffraction Optics Technology

Improving Diffraction Efficiency of DOE in Wide Waveband Application by Multilayer Micro-Structure

Flat Optical Lens by Use of 90-Degree Volume Holographic Grating Recording Geometry and Nonvolatile Thermal Fixing in LiNbO3:Fe Crystal

Development and Analysis of Space-based Diffractive Optical Imaging Techniques

Design, Fabrication and Analysis of a Hybrid-Order Monolithic Imaging Diffractive Lens on a Germanium Substrate

Fabrication of Optical Mosaic Gratings by Consecutive Holographic Exposures Employing A Latent-Fringe Based Alignment Technique

Design and Fabrication of a Variable-Line-space Grating Surface for a Fresnel-grating Lens Based Miniature Spectrometer

Single- and multi-layer micro-scale diffractive lens fabrication for fiber imaging probes with versatile depth-of-field

Optical design of an off-axis Five-mirror-anastigmatic Telescope for Near Infrared Remote Sensing

Optical-digital joint design of multi-order diffractive lenses for lightweight high-resolution computational imaging

High-efficiency, 80-mm aperture metalens telescope

Economic fabrication of a novel hybrid planar Grating/Fresnel lens for miniature spectrometers

Shortening Focal Length of 100‐mm Aperture Flat Lens Based on Improved Sagnac Interferometer and Bifacial Liquid Crystal

Design Method for Freeform Off-Axis Three-Mirror Anastigmat Optical Systems with a Large Field of View and Low Error Sensitivity

Optical system for extremely large spectroscopic survey telescope

Additive manufacturing of solid diffractive optical elements via near index matching