Abstract:The smooth particle hydrodynamics (SPH) method is advantageous in tracking a free surface and a moving interface. This paper uses the SPH method to simulate the filling process of squeeze casting. The simulated temperature field at the end of filling was input into a finite element model (FEM) program to simulate the solidification process after squeeze casting. Due to the existence of a liquid phase, a solid phase, and a two-phase mushy zone in the solidification process after squeeze casting, the deformation behavior in the solidification process was modeled with a thermoelasto–viscoplastic constitutive model representing these different phases. In the RDG thermal cracking criterion based on the principle of dendrite gap complement, there are a strain rate term, a secondary dendritic spacing term, and a pressure term. These terms accurately describe the squeeze casting process. Therefore, the RDG criterion was used to predict thermal cracking. The strain rate term in the RDG criterion was calculated by the FEM. For the calculation of the secondary dendritic spacing, the temperature field during the solidification process is locally refined by the FDM method to complete the transition from the macroscale to the mesoscale; then the refinement results are imported into the phase field method for dendritic growth simulation. The results show that the method based on multi-model coupling has satisfactory prediction accuracy for the thermal cracking in the squeeze casting process. The combination of the phase field method and the RDG criterion provides a new approach to the simulation of thermal cracking defects. The prediction results show that the thermal cracking tendency increases with an increase in strain rate. However, the local position C of the bracket sample had a higher strain rate of 7.15/s, and a lower cooling rate of 2.96 K/s offset the effect of the high strain rate. As a result, a low thermal cracking tendency level of 1.13729 was obtained.

Prediction of the Equivalent Elastic Modulus of Mush Zone During Solidification Process Coupled with Phase Field Simulations

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Constitutive Behavior Predictions of Mushy Zone During Solidification by Phase Field Model and Coupled Eulerian–Lagrangian Method

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Phase Field Simulation of Multiple Phase Transformation of Fe-C Alloy During Solidification Process

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Zone Partitioning Sequential Calculation Method for Three-Dimensional Phase-Field Material Simulation During Directional Solidification

A Thermomechanical Finite Element Model for Simulating the Solidification Process of Squeeze Casting

Progress in Convection Effects on Dendritic Growth Using Phase-field Method

Prediction of Mushy Zone Permeability of Al-4.5wt%Cu Alloy During Solidification by Phase Field Model and CFD Simulation

Elastic constants of stressed and unstressed materials in the phase field crystal model

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Thermomechanical Modeling of Solidification Process of Squeeze Casting I. Mathematic Model and Solution Methodology

Numerical simulation on solidification and thermal stress of continuous casting billet in mold based on meshless methods

Thermal cracking prediction for a squeeze casting process with an approach of multi-scale and multi-model coupling

A generalised phase field model for fatigue crack growth in elastic-plastic solids with an efficient monolithic solver

Modelling of Secondary Dendrite Arms Evolution During Solidification by a Phase-field Method

Direct Numerical Simulation of Solid Deformation During Dendritic Solidification

An Effective Model for the Elastic Behavior of Two-Phase Materials Based on Structural Recognition

Multiphase and multiphysics modeling of dendrite growth and gas porosity evolution during solidification

Cfd-Based Multicomponent Model for Solidification of Casting Process