Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Thermodynamic Analysis and Performance Optimization of Solid Oxide Fuel Cell and Refrigerator Hybrid System Based on H-2 and Co

Thermodynamic Assessment of an Integrated Molten Carbonate Fuel Cell and Absorption Refrigerator Hybrid System for Combined Power and Cooling Applications

Thermodynamic Analysis of A Hybrid System Integrating an Alkaline Fuel Cell with an Irreversible Absorption Refrigerator

Thermodynamic Analysis Of An Integrated Power Generation System Driven By Solid Oxide Fuel Cell

A Concept of Combined Cooling, Heating and Power System Utilising Solar Power and Based on Reversible Solid Oxide Fuel Cell and Metal Hydrides

Exergy analysis and parameters optimization for zero-carbon/low-carbon fuels on SOFC-engine hybrid system

Thermo-economic-environmental Analysis of an Innovative Combined Cooling and Power System Integrating Solid Oxide Fuel Cell, Supercritical CO2 Cycle, and Ejector Refrigeration Cycle

Thermodynamic Analysis of a New Combined Cooling, Heat and Power System Driven by Solid Oxide Fuel Cell Based on Ammonia–water Mixture

Performance Analysis and Multi-Objective Optimization for a Hybrid System Based on Solid Oxide Fuel Cell and Supercritical CO2 Brayton Cycle with Energetic and Ecological Objective Approaches

Proposed hybrid system with integrated SOFC, gas turbine, and compressor-assisted absorption refrigerator using [mmim]DMP/CH 3 OH as working fluid

Energy and Parameter Analysis of SOFC System for Hydrogen Production from Methane Steam Reforming

Maximum power density analyses of a novel hybrid system based upon solid oxide fuel cells, vacuum thermionic generators and thermoelectric generators

Comparison Analysis of Hydrogen Addition into Both Anode and Afterburner of Fuel Cell Incorporated with Hybrid Renewable Energy Driven SOFC: an Application of Techno-Environmental Horizon and Multi-Objective Optimization

Performance Assessment and Parametric Study of a Hybrid System Consisting of an Alkali Metal Thermoelectric Converter and an Absorption Refrigerator

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

Multi-Criteria Assessment of Solid Oxide Fuel Cell–Combined Cooling, Heating, and Power System Model for Residential Application

A Feasible Way to Handle the Heat Management of Direct Carbon Solid Oxide Fuel Cells

Performance Improvement of a Direct Carbon Solid Oxide Fuel Cell System by Combining with a Stirling Cycle

Energy and Exergy Analyses of a Novel Hybrid System Consisting of a Phosphoric Acid Fuel Cell and a Triple-Effect Compression–absorption Refrigerator with [mmim]dmp/ch3oh As Working Fluid

Electrochemical-Thermodynamic Coupling Modeling of Solid Oxide Fuel Cells for Integrated Energy System Optimization Scheduling