Abstract:<section class="article-section__content"><p>A design study was undertaken of a 100 kW natural gas solid oxide fuel cell (SOFC)/gas turbine (GT) hybrid system to evaluate the impacts of the reforming process under a broad range of SOFC fuel utilizations. An equilibrium reformer model and a one-dimensional SOFC model are employed to perform system study for this hybrid, while balance of plant model is built in Ebsion to simulate the associated performance of GT cycle. Fifty design cases with varied external fuel reforming temperatures are analyzed based on different SOFC fuel utilization levels. With the decrease of reforming temperature, optimal fuel utilization in terms of efficiency shift from 90% with external reforming to 60% with internal reforming. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy. And the feasibility of achieving high efficiencies in the hybrid system with thermally integrated external reforming will be explored in our future work.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><p>Both fuel reforming process and fuel utilization could affect the heat and energy balance in the hybrid gas solid oxide fuel cell (SOFC)-gas turbine (GT) system. However, the optimal design condition considering different fuel reforming approaches and SOFC fuel utilization levels was not determined in the literature. In addition, appropriate integration strategies, used to balance the heat and power between the two subsystems (SOFC and GT), are imperative under different fuel reforming approaches and SOFC fuel utilization levels. But, the feasibility of those thermal integration strategies has not been examined in existing studies. This work studied the coupling effects of SOFC fuel utilization and fuel reforming process on system performance of a natural gas hybrid SOFC/GT cycle. Highest efficiency up to 74% was achieved with internal reforming, but this came with 1275 K cathode inlet air temperature and 1673 K turbine inlet temperature, which no current fuel cell and few GTs can tolerate. High fuel pre-reforming rates provided a higher design flexibility and showed opportunities of efficiency improvement with appropriate thermal integration strategy.</p></section>

Performance Analysis and Multi-Objective Optimization for a Hybrid System Based on Solid Oxide Fuel Cell and Supercritical CO2 Brayton Cycle with Energetic and Ecological Objective Approaches

Conceptual Design and Performance Analysis of a Novel CHP System Integrated with Solid Oxide Fuel Cell and Supercritical CO 2 Partial Preheating Cycle

Coupling Effect of Operating Parameters on Performance of a Biogas-Fueled Solid Oxide Fuel Cell/gas Turbine Hybrid System

Performance analysis and multi-objective optimization of a novel poly-generation system integrating SOFC/GT with SCO2/HDH/ERC

Design and Sensitivity Analysis of a Multistage Solid Oxide Fuel Cell Hybrid System with an Inter-Cooled-recuperated Gas Turbine and Organic Rankine Cycle

Energy, exergy, exergoeconomic, environmental (4E) evaluation and multi-objective optimization of a novel SOFC-ICE-SCO 2 -HRSG hybrid system for power and heat generation

Performance Analysis of SOFC/micro-GT Hybrid System

Effect of Operating Parameters on Performance and Safety Evaluation of a Biogas-fueled SOFC/GT Hybrid System

Performance Analysis of Coal Gasification-SOFC Hybrid Systems

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Design and optimization of a solid oxide fuel cell-inverted gas turbine integrated system with zero carbon emission for distributed cogeneration

Performance Improvement of a Direct Carbon Solid Oxide Fuel Cell System by Combining with a Stirling Cycle

A novel hybrid process with a sustainable auxiliary approach concerning a biomass-fed solid oxide fuel cell and triple-flash geothermal cycle

Performance Analysis and Optimization of SOFC/GT Hybrid Systems: A Review

Conceptual Design and Performance Analysis of Sofc/Micro Gas Turbine Hybrid Distributed Energy System

Achieving high-efficiency conversion and poly-generation of cooling, heating, and power based on biomass-fueled SOFC hybrid system: Performance assessment and multi-objective optimization

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

Coupling effects of fuel reforming process and fuel utilization on the system performance of a natural gas solid oxide fuel cell/gas turbine hybrid system

Exergy analysis and parameters optimization for zero-carbon/low-carbon fuels on SOFC-engine hybrid system

Multi-variable study and MOPSO-based multi-objective optimization of a novel cogeneration plant using biomass fuel and geothermal energy: A complementary hybrid design

Thermodynamic investigation of an integrated near-zero CO2 emission power generation system with SOFC, MGT, SCO2BC, and CO2 capture