Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

Electrodeposition of Photoactive Silicon Films for Low-Cost Solar Cells

Toward Cost‐Effective Manufacturing of Silicon Solar Cells: Electrodeposition of High‐Quality Si Films in a CaCl2‐based Molten Salt

Electrodeposition of Crystalline Silicon Films from Silicon Dioxide for Low-Cost Photovoltaic Applications

Production Of Low-Cost Silicon Films Via Molten Salt Electrodeposition

Silicon and Germanium Nanocrystal Inks for Low-Cost Solar Cells

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Flexible, Dopant Free A-Si:H Solar Cell

Inexpensive Transparent Nanoelectrode for Crystalline Silicon Solar Cells

Silicon Photoelectrodes Prepared by Low-Cost Wet Methods for Solar Photoelectrocatalysis

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Electrochemical Formation of a P-N Junction on Thin Film Silicon Deposited in Molten Salt

Solar Cells on Multicrystalline Silicon Thin Films Converted from Low‐Cost Soda‐Lime Glass

Reduced Toxicity and Aqueous-Based Solvent Using Phosphoric Acid as the Dopant Source for Formation Emitter Layer of Silicon Solar Cells

Recent Advances in Electrochemical-Based Silicon Production Technologies with Reduced Carbon Emission

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al 2 O 3 passivation layer

Photoelectrochemical Deposition of Silicon–Carbon Layer on P-Type Semiconductors and Aluminum–Copper Alloy in Ionic Liquid

Nano silver-catalyzed chemical etching of polycrystalline silicon wafer for solar cell application

Nano-crystalline Thin Films Fabricated by Si-Al Co-Sputtering and Metal Induced Crystallization for Photovoltaic Applications

Silicon Substrate Treated with Diluted NaOH Aqueous for Si/PEDOT: PSS Heterojunction Solar Cell with Performance Enhancement

Preparation of High Purity Crystalline Silicon by Electro-Catalytic Reduction of Sodium Hexafluorosilicate with Sodium below 180°C