Abstract:LaMgAl11O19 (LMA) with magnetoplumbite structure has been identified as a potential candidate for the next generation of thermal barrier coatings (TBCs). However, the as-sprayed LMA coating presents a large amount of amorphous phase originating from the rapid quenching from the molten droplets, which may compromise the reliability of coating during high-temperature service. A logical approach to improve LMA TBC life, therefore, is to enhance its crystallinity. In the present study, three LMA powders with different particle size distributions (fine, medium and coarse feedstocks) were utilized to deposit TBCs to investigate whether the thermal durability of LMA can be improved by increasing particle size. It was based on a hypothesis that large particle size can decrease the melting degree of in-flight particles and thus result in high crystallinity of as-sprayed LMA coating, making less recrystallization stress to enhance the thermal shock resistance of LMA coating. Results show that prolonged thermal cycling durability can indeed be achieved by increasing particle size. However, excessive particle size could lead to higher porosity derived from unmelted particles, which function as the weak regions for the coating system, thereby damaging the structural integrity and adhesive strength between the topcoat and bond coat. This could cause microcrack linking when the accumulated thermal stress exceeds its fracture toughness under consecutive heating-cooling cycles despite its higher crystallinity. Concerning the coating fabricated by medium powder, it achieves the optimal balance of crystallinity and structure integrity, resulting in the longest thermal cycling lifetime. The results provide guidance for the development and design of high thermal durability LMA TBCs. When optimizing the recrystallization stress within the coating, attention should be paid to improving its bonding strength simultaneously.

Synthesis and Characterization of LaMgAl11O19 As Thermal Barrier Coatings Material

Mechanical and thermal properties of LaMgAl11O19

Preparation and Thermal Conductivity of (La0.95Mg0.05)2Ce2O6.95 Ceramics

Influence of Amorphous Phase in LaMgAl11O19 on Properties of LaMgAl11O19/YSZ Thermal Barrier Coatings

Preparation, Characterization, And Thermophysical Properties Of (La0.95sr0.05)(2)Ce2o6.95 Ceramic For Thermal Barrier Coatings

Low Thermal Conductivity Sr 2+ , Zn 2+ and Ti 4+ Ions Co-Doped LaMgAl 11 O 19 for Potential Thermal Barrier Coating Applications

Thermo‐Optical Properties of LaMAl11O19 (M = Mg, Mn, Fe) Hexaaluminates for High‐Temperature Thermal Protection Applications

Influence of Ln3+ and B3+ Ions Co‐Substitution on Thermophysical Properties of LnMB11O19‐type Magnetoplumbite LaMgAl11O19 for Advanced Thermal Barrier Coatings

Microstructure, thermal shock resistance and thermal emissivity of plasma sprayed LaMAl11O19 (M = Mg, Fe) coatings for metallic thermal protection systems

Preparation and thermo-physical properties of La2AlTaO7 ceramic for thermal barrier coating application

Mechanical Properties of LaTi2Al9O19 and Thermal Cycling Behaviors of Plasma-Sprayed LaTi2Al9O19/YSZ Thermal Barrier Coatings

Improvement on thermophysical and mechanincal properties of LaMgAl11O19 magnetoplumbite by Nd2O3 and Sc2O3 co-doping

Lanthanum–titanium–aluminum oxide: A novel thermal barrier coating material for applications at 1300°C

Influence of Divalent Me2+ on Phase Structures and Thermophysical Properties of Magnetoplumbite Type LaMgAl11O19

Oxidation behavior and interface evolution of tri-layer Si/Yb2SiO5/LaMgAl11O19 thermal and environmental barrier coatings under isothermal heat treatment at 1300 °C

Microstructures, thermophysical properties and thermal cyclic behaviors of Nd2O3 and Sc2O3 co-doped LaMgAl11O19 thermal barrier coating deposited by plasma spraying

Oxidation behavior and structural damage mechanism of LaMgAl 11 O 19 dual-ceramic thermal barrier coating with varying thickness of Al plating layer

Prolonged thermal durability of plasma-sprayed lanthanum hexaluminate thermal barrier coating by optimizing crystallinity

Preparation of 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings on GH4169 superalloy substrates and their static high temperature oxidation behaviour

Enhanced anti‐deliquescent property and ultralow thermal conductivity of magnetoplumbite‐type LnMeAl11O19 materials for thermal barrier coating

Synthesis of YxGd3-xAl5O12 for thermal barrier coating by solid-state reaction method