Abstract:<p>Recently, an increasing number of small satellites have chosen electric propulsion (EP) as the propulsion system for motion control in space flights. Research on the ejected high energy plasma plumes from EP thrusters has attracted significant interest due to their interactions with the components of satellites. This work demonstrates a probe array diagnostic platform (with 67 Faraday probes on the array) that enables the acquisition of the full three-dimensional morphology of the plume current density from the near-field to the far-field of EP stationary thrusters. The plume parameters of an ion thruster including the 3-D plume morphology, divergence angle, and thrust vector angle are measured using this diagnostic platform. From 250 to 700 mm from the thruster exit, the plume field exhibits a stable divergence angle of 43.6°. By fitting circles to the contours of each cut plane, the average thrust vector angle is calculated to be 1.3°, and the repeatability error for the circle center fitting is approximately 2.2%. The current density profiles on exit cut planes demonstrate an "elliptical distortion" phenomenon in the plume shape. Using the ellipse fitting method, it is found that an elliptical shape was formed in the near-field of the plume. As the plume propagates to the far-field, the distortion of the ellipse becomes more apparent (the aspect ratio is 1:1.14). Some possible causes may be the geo-magnetic field, background vacuum environment distribution, or thruster manufacturing error. The thrust vector data can provide a basis for the control strategy of the satellites. In addition, the 3-D plume current density data can give us a comprehensive understanding of the plume plasma physics. These results may also provide an accurate and rich database for parameters for future plume simulations.</p>

The Research Of Measuring Plasma Parameters With Internal Double Langmuir Probe In Galatea

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Divisionally Analytical Solutions of Laplace'S Equations for Dry Calibration of Electromagnetic Velocity Probes

Improved analysis techniques for cylindrical and spherical double probes

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Design of a Unidirectional Reception and High Temperature Resistance Electric Field Probe for Measuring the Internal Electric Field of Plasma

Research on Low Pressure Electronic Density Diagnostic Method of Single Paperback Probe Based on Langmuir Probe Theory

Three-dimensional measurement of a stationary plasma plume with a Faraday probe array

Study of plasma parameters in high enthalpy ICP-heated wind tunnel by using single Langmuir probe

Design and calibration of permanent magnet probes for the local measurement of velocity and temperature in a liquid metal backward facing step flow

Comparative studies of cold/hot probe techniques for accurate plasma measurements

Experimental Evaluation of Langmuir Probe Sheath Potential Coefficient on the HL-2A Tokamak

Movable Multi-Probes For Plasma Boundary Measurement In Sino-United Spherical Tokamak

All-in-one probe for exploring self-organized two-fluid equilibria in toroidal plasmas

Research on Plasma Electron Density Distribution Based on Microwave Diffraction

Experimental validity of double-curling probe method in film-depositing plasma

Electron density measurement of an ionospheric-like plasma using an impedance probe

Deuterium Plasma Diagnosis in a Miniature Penning Ion Source by a Single Probe

The ac-coupling between a Langmuir probe and a plasma and its effect on the plasma density measurement in the afterglow

Electron density measurements in low-pressure plasmas using cutoff probes and comparison with hairpin and Langmuir probes

Measurements of the Net Charge Density of Space Plasmas