Abstract:To explore the effect of calcium concentration in the electrolyte solution on the physicochemical properties and biocompatibility of coatings formed by micro-arc oxidation (MAO) on titanium surfaces.The surfaces of pure titanium plates were modified by MAO in an electrolytic solution containing calcium acetate (CA; C4H6CaO4) at concentrations of 0.05, 0.1, 0.2, or 0.3 M and β-glycerophosphate disodium salt pentahydrate (β-GP; C3H7Na2O6P·5H2O) at a fixed concentration of 0.02 M. Surface topography, elemental characteristics, phase composition, and roughness were investigated by scanning electron microscopy, energy-dispersive X-ray analysis, X-ray diffraction, and a surface roughness tester, respectively. To assess the cytocompatibility and osteoinductivity of the surfaces, MC3T3-E1 preosteoblasts were cultured on the surfaces in vitro, and cell morphology, adhesion, proliferation, and differentiation were observed.The porous MAO coating was composed primarily of TiO2 rutile and anatase. The amount of TiO2 rutile, the Ca/P ratio, and the surface roughness of the MAO coating increased with increasing CA concentration in the electrolyte solution. Ca3(PO4)2, CaCO3, and CaTiO3 were formed on MAO-treated surfaces prepared with CA concentrations of 0.2 and 0.3 M. Cell proliferation and differentiation increased with increasing CA concentration, with MC3T3-E1 cells exhibiting favorable morphologies for bone–implant integration.MAO coating improves the surface characteristics and cytocompatibility of titanium for osseointegration. Higher CA concentration in the MAO electrolyte solution has a positive effect on the surface properties, chemical composition, and cell response.

Synthesis of Porous Ce-doped Titania Coating Containing CaTiO3 by MAO and Its Apatite Inducing Ability

Biomimetic Deposition of Apatite on Electrochemically Oxidized Titanium Substrates

Synthesis and Charaterization of Silicon-Substituted Hydroxyapatite Coating by Electrochemical Deposition on Ti Substrate

[Experimental Study of Fast Formation of Biomimetic Apatite Coatings on Pure Titanium Surface].

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Synthesis and Properties of Hydroxyapatite-Containing Porous Titania Coating on Ultrafine-Grained Titanium by Micro-Arc Oxidation

Preparation and Characterization of TiO2/silicate Hierarchical Coating on Titanium Surface for Biomedical Applications.

Study on Morphologies and Structures of Ceramic Coating Prepared by Micro-Arc Oxidation on TC4 Alloy

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Fabricating Electroactive Azobenzene Self-Assembled Monolayers and Their Characterization

BIOCERAMIC COATINGS ON TITANIUM SURFACES

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

High-temperature oxidation behavior of CeO2 doped MAO coatings on TC4 titanium alloy

Low-Temperature Deposition of Bioactive Crystalline Titania Films: Effects of Tantalum

One-Step Approach for the Fabrication and Characterization of Hydroxyapatite/Tio2 Composite Ceramic Coatings by Micro-Arc Oxidation in Situ on the Surface of Pure Titanium

Preparation of Dicalcium Phosphate Anhydrous (Monetite) Biological Coating on Titanium by Spray-Drying Method

A Novel Titania/calcium Silicate Hydrate Hierarchical Coating on Titanium.

Structure and properties of cerium-doped TiO2 coatings on Ti40Nb alloy by micro-arc oxidation

Preparation and growth behaviours of low porosity hydroxyapatite with enhanced adhesion by electrochemical deposition on micro-arc oxide coatings

Carbonate apatite coating on titanium induced rapidly by precalcification.

Preparation and Wear Resistance of Porous TC4 Titanium Alloy Micro‐arc Oxidation Coating Produced by Selective Laser Melting