Abstract:The Acoustic Emission (AE) phenomenon has been used as a powerful tool with the purpose to either detect, locate or assess damage for a wide range of applications. Derived from its monitoring, one major current challenge on the analysis of the acquired signal is the proper identification and separation of each AE event. Current advanced methods for detecting events are primarily focused on identifying with high accuracy the beginning of the AE wave; however, the detection of the conclusion has been disregarded in the literature. For an automatic continuous detection of events within a data stream, this lack of accuracy for the conclusion of the events generates errors in two critical aspects. In one hand, it deteriorates the accuracy of the measurement of the events duration, truncating the span of the event (undesirable in evaluation applications), and in the other hand, it causes false detections. In this work, an accurate and computationally efficient AE activity detector is presented, using a framework inspired by the area of speech processing, and which provides the required indicators to accurately detect the onset and the end of an AE event. This is achieved by means of a threshold approach that instead of directly operates with the transduced voltage signal it does so over the Short-Term Energy and the Short-Term Zero-Crossing Rate measures of the signal. The STE-ZCR method is developed for an application related to the continuous monitoring of a single AE channel derived from the characterization of metallic components by means of a uniaxial tensile test. Additionally, two experimental test-benches are implemented with the aim to quantify the accuracy and the quality of event detection of the presented method. Finally, the obtained results are compared with four different techniques, representing the current state of the art related to AE activity detection.

Fibre Optic Acoustic Emission Sensor System for Hydrogen Induced Cold Crack Monitoring in Welding Applications.

Feasibility Study of Acoustic Emission Monitoring of Hot Cracking in GTAW Weld

Acoustic emission sensing in fiber Bragg grating based on phase demodulation for material health detection

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

An Experimental Analysis for Damage Monitoring in Glass Fiber/Epoxy Composites During Fatigue Tests by Acoustic Emission

Feasibility assessment of non-contact acoustic emission monitoring of corrosion-fatigue damage in submerged steel structures

In-line monitoring of cryogenic three-point bending test of fiber-reinforced composites using acoustic emission

Acoustic Emission Characterization of Damage Patterns in Composite Scarf Joints Using Unsupervised Learning

Investigation of Hydrogen Embrittlement in 304 Austenitic Stainless Steel Through Acoustic Emission Monitoring and Deep Learning

Welding Deformation of Hydraulic Support Measurements by Using FBG Sensors

Implementation of a Fiber-Wrapped Polymer Mandrel Acoustic Emission Sensor

Use of a structure-borne sound-based in-process sensor system to identify Weld seam irregularities during electron beam welding

A Fiber-Optic Sensor for Acoustic Emission Detection in a High Voltage Cable System

Analysis of acoustic emission signal in the tensile process of weld-bonding joint and its damage model

Acoustic Emission Signal Due to Fiber Break and Fiber Matrix Debonding in Model Composite: A Computational Study

An Acoustic Emission Activity Detection Method based on Short-Term Waveform Features: Application to Metallic Components under Uniaxial Tensile Test

Detection of arc characteristics and weld forming quality of aluminum alloy DP-MIG welding using AE signal through resonance demodulation

Detection of defects during laser-powder interaction by acoustic emission sensors and signal characteristics

Bragg grating-based fibre optic sensors in structural health monitoring

A novel data-based approach for monitoring fatigue crack propagation in welded joints under varying ambient temperature using the electromechanical admittance

Modal acoustic emission-based circumferential crack feature extractions for pipeline welds with L-shaped flexible sensor array