Abstract:Inner porosity of aluminum alloy in arc welding is usually invisible, transient and difficult to detect in real-time with weak physical information. This study investigated the key technologies for on-line inner porosity detection for aluminum-magnesium (Al-Mg) alloy in pulsed gas tungsten arc welding (GTAW) using arc optical spectroscopy and post-micro-characterization. A monitoring system for robotic GTAW was developed using a spectrometer, charge-coupled device camera, and microphone. Experiments for different degrees of porosity were designed before post-testing and microscopic characterization using scanning electron microscopy and energy dispersive spectroscopy. Two types of generation mechanism of inner porosity were discovered for Al alloy in GTAW. The line spectrums of metal and hydrogen components were selected before feature extraction by means of principal component analysis of optical spectroscopy. The correlation between the principal component coefficient of line spectrums (H I and Mg I) and inner porosity was quantitatively investigated using statistical values. Then, an improved feature parameter, e.g., the absolute coefficient of the H I spectrum from the first principal component, for inner porosity detection was proposed and experimentally validated at different levels of porosity. Finally, feature reduction and visualization were achieved by means of the proposed principal component analysis and t-Distributed Stochastic Neighbor Embedding. The correlation between microscopic analysis and spectrum features is also discussed.

Detection of arc characteristics and weld forming quality of aluminum alloy DP-MIG welding using AE signal through resonance demodulation

Time frequency feature extraction of the arc energy for quality detection of the aluminum alloy double pulse MIG welding

Online Welding Quality Monitoring Based on Feature Extraction of Arc Voltage Signal

Online Defect Detection of Al Alloy in Arc Welding Based on Feature Extraction of Arc Spectroscopy Signal

Failure Characterization of Al-Zn-Mg Alloy and Its Weld Using Integrated Acoustic Emission and Digital Image Techniques

On-line monitor of hydrogen porosity based on arc spectral information in Al–Mg alloy pulsed gas tungsten arc welding

Audio sensing and modeling of arc dynamic characteristic during pulsed Al alloy GTAW process

Acoustic Emission Detection During Welding Residual Stresses Release in 2.25cr1mo0.25v Steel Welds

EMD-based Pulsed TIG Welding Process Porosity Defect Detection and Defect Diagnosis Using GA-SVM

Feature Extraction and Modeling of Welding Quality Monitoring in Pulsed Gas Touch Argon Welding Based on Arc Voltage Signal

Multisensor-Based Real-Time Quality Monitoring by Means of Feature Extraction, Selection and Modeling for Al Alloy in Arc Welding

The On-Line Identification and Location of Welding Interference Based on CEEMD

Spectroscopic Diagnostics of Pulsed Gas Tungsten Arc Welding Plasma and Its Effect on Weld Formation of Aluminum-Magnesium Alloy

Ultrasonic non-destructive evaluation study of molecular diffusion bonding of thin copper-aluminum electrode sheets

A Quality Diagnosis Method of GMAW Based on Improved Empirical Mode Decomposition and Extreme Learning Machine

Acoustic Emission Testing on Aluminum Alloy Pressure Vessels

Research on Process Characteristics and Properties in Deep-Penetration Variable-Polarity Tungsten Inert Gas Welding of AA7075 Aluminum Alloy

Study of Inner Porosity Detection for Al-Mg Alloy in Arc Welding Through On-Line Optical Spectroscopy: Correlation and Feature Reduction

Study on the Acoustic Emission Effect of Plasma Plume in Pulsed Laser Welding

An Extraction Method of Welding Crack Acoustic Emission Signal Using Harmonic Analysis

Study on the thermo-effect of P-GMAW characterized by structure-borne acoustic emission signals detected in welding on aluminum alloy